Solar Charge,Solar Panel Controller 12V/24V

Features:

• About the Sollar Charger Controller - Fully 4-stage PWM charge management;Dual mosfet Revers e current protection ,low heat production.

• Multifunctional - Build-in industrial micro controller ,One-key setting,digital display,auto memory function.Multiple Protection Functions: solar controller has short-circuit protection, open-circuit .

• SYSTEM CONNECTION FRAME: Connect the battery to the charge regulator - plus and minus.it will show：if it detects12V battery； if it detects 24V battery.Connect the photovoltaic module to the regulator - plus and minus.Connect the consumer to the charge regulator - plus and minus.

• Battery Type - The regulator is only suitable for lead acid batteries: OPEN,AGM, GE L,it is not suited for nickel metal hydride, lithium ions or other batteries.not for nickel hydride, lithium, Liions, or other batteries.

• Wide Applications - LCD display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration,Easy to set up and operate. Widely used in home, industrial, commercial etc.
• Solar panel suitable for solar power system, solar street lamp, smart home, solar light box, intelligent irrigation,camping lantern etc.
• This controller can only use photovoltaic panel as the charging source, do not use DC or other power supply as the charging source.
  

Specification:
This controller can only be used on lead-acid batteries, LCD display PWM battery charging 
All necessary protections equipped
Adjustable controlling parameter of the system
Battery Voltage : 12V / 24V
Charge Current : 10A,20A,30A,50A,60A,80A,100A(optional)
Discharge Current : 10A,20A,30A,50A,60A,80A,100A(optional)
Working Temperature : -35℃ to +60℃
Application : Home, Industrial,
Commercial
Self consume : ≤10mA
Float Charge : 13V
Discharge stop :10.7V
Discharge reconnect :12.6V
Size : 133 x 70 x 32mm/ 5.23x 2.75x 1.25''
12V battery can only access 18V-20V solar panels
24V battery can only access 36-40V solar panels
Read the manual carefully before use and then connect the controller!

Warning: The controller and battery pack should be installed away from high temperature and humidity environment, and away from flammabl e and explosive materials.
Please put the controller in a ventilated place during use. Do not cover the controller or install it on the car.
1. Q: Does this controller support lithium batteries?
A: Currently only supports lead-acid batteries (including openings, seals, ge ls and other batteries) Lithium battery is not supported (please do not connect the lithium battery as there is a risk of explosion).
2. Q: My solar panel is 36V200W, can I charge 12V battery?
Answer: Charge 12V battery, the working voltage of solar panel is between 17-23V, charge 24V battery, The working voltage of the solar panel is between 36-46V. Please confirm the power and work of the solar panel The voltage can be used within this range, if it is too large, it will damage the controller.
Install and Operate: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Revers e current protection, low heat production. 

Packing List:

1X 10/20/30/50/60/80/100A(optional)  Solar Charge Contorller

1X English User Manual