915 Generation Dual Time Adjustable Delay Timing Relay Repeat on OFF Switch

It is a timer relay module with high precision, stable and performance.
There is a wide range of time you can set, "run" time and "stop" time are adjustable.
Support / stop function, the module goes into mode after power on, the relay works according to the runtime and stop time setting.
It is perfect to control reciprocating stroke, or repetitive power for equipment and break-in test .
Widely used on timer operation equipment, machine repetitive test circuit, fish tank intermittent pump, etc. With / stop function, after starting the module in the loop mode, the relay works according to the set time.
Working model:
Press the button to the , then press the button to stop working. mode: on-off-on-off-
Voltage: AC 100V-250V, can be used for 100V / 110V / 120V / 127V / 220V / 230V / 240V / V / V.
Power Consumption: less than 1.0W
Output: Active output, output voltage to input voltage.
Max. Output current: less than 10A
Input: passive switch input, green led light on after power on, red led light on after shutdown
Time range: 0.5 seconds to 1000 minutes
Time accuracy: maximum range value * 0.001 (resolution 1000).
Input ( button): passive switch input, green led light on after power on, red led light on after shutdown
Starting the input is not necessary. You can connect the two 2 terminal terminals with a short wire and then the board will continuously in a loop (no buttons) after power on.
Life: 100 thousand Size: 88x38x22mm / 3.46x1.49x0.86 inch
Mounting hole spacing: 83x33mm / 3.26x1.3 inch
Mounting Hole Diameter: 3.2mm / 0.12 inch
Colour: green
Material: plastic Package Contents:
1 x Dual Time Adjustable Delay Timing Relay Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.