Wireless Audio Adapter Bluetooth 5.0 Receiver & Transmitt er
1. Bluetooth version: Bluetooth V5.0
2. Support protocol: RX (A2DP/AVRCP), TX (A2DP)
3. Working frequency band: 2.402GHz -2.480GHz
4. Support dual stream (TX mode): support a Transmitt er to connect two Bluetooth speakers or earphones at the same time to use a CODEC at the same time, can support APTX LL
5. Support multi-point connection (RX mode): support to connect two mobile phones
6. Battery capacity: 500mAh
7. Charging current: about 350mA
8. Charging time: about 2.5 hours
9. Bluetooth distance: greater than 80m (unobstructed)
10. Charging method: Micro USB 5V/0.5A
11. Input/output connection mode: interface, AUX interface, support , AUX dual simultaneous output
12. Compatible: Android, IOS system mobile phone and PAD, and Bluetooth speakers or earphones supporting A2DP protocol to connect and use
13. Size: about 11x9x2.5cm
14. Weight: about 70g
Features:
1. Exquisite appearance
2. Using CSR high-end chip design
3. One-key switch between RX and TX modes
4. , audio input/output interface, can be switched freely
5. Two anten nas, the Bluetooth operating distance is greater than 80M, and the stability is strong
6. High fidelity lossless sound quality, ultra-low latency sound output, support apt-X LL, apt-X, SBC, AAC, FS
7. When the battery is less than 20%, there will be a low battery reminder. After 6 minutes in the RX, TX mode without connection, it will automatically enter the sleep power saving mode, and it has its own battery protection IC, which is safe and reliable while charging.
8. Support dual-stream (TX mode) transmission and connect two Bluetooth audio devices
9. Receive (RX) can be connected to two devices at the same time, any two of the mobile phone/tablet/notebook device, and the volume and up and down songs can be controlled by the ons during playback
10. Both receiving mode and transmitting mode can realize automatic return connection, and have memo