Chloride Exide 1ltr Battery Water-WHITE

The 1ltr Battery water is specifically designed to be used in batteries.This is used to top up batteries with low level of electrolyte and is not fit for human consumption.Distilled water is used to dilute acid lead acid in battery that is required for the flow of electricity in the battery.Battery fluid, a mixture of sulfuric acid and distilled water (called electrolyte), creates the electricity that makes a modern battery work so efficiently. Depending on the type of battery in your vehicle, battery fluid can evaporate and over time will need to be topped off as part of regular battery care.The most common type of water used in batteries is distilled water.
Other types are deionized water and water from reverse osmosis.
Ordinary tap water should not be used because it may contain an
excessive amount of impurities that will degrade battery performance.
(See Table 1 for acceptable maximum allowable impurities in water
for battery use).
Distilled water is produced by distillation, a process in which water is
boiled, the steam is collected and then condensed back into water.
This process creates a finished product free of minerals, having left
all the impurities in the original water sample.
Deionized water is the purest form of water, but it is also the most
expensive. The process of deionization removes all ionizable particles
(organic and inorganic) from water through ion exchange. Positively
and negatively charged ions are removed from the water and replaced
with H+ and OH- ions. When these two ions are combined, they form
H2O or purified water.
Reverse osmosis is a method of removing solids from water by
forcing it through a membrane. The membrane rejects all solids while
allowing purified water to pass through. The choice of membrane
determines the amount of impurities that the water may contain.