LDS-1G Digital Grain Moisture Meter Detector Cereal Humidity Measure Tester Hygrometer Analyzer Test Equipment for Grains Coffee Been Rice Wheat Millet Soybean Maize Corn

Description

grain moisture meter, seed moisture meter, cereal moisture meter.

Because of the zone and species difference and the limitation to the pre-established standard species parameters.

it is possible to find the error when using the default parameters defined by the factory. The customer can use following way to calibrate the error and standard to make sure the precision.

1) revisory value confirmation:

Based on the standard samples by means of 105°C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.

2) In revising status:

Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red.

lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.

3) revision:

Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes.

Press the species key or switch off to exit.