Mercedes 2000 Manicure & Pedicure Set

Mercedes 2000 Manicure & Pedicure Set, a professional-grade electric nail drill designed for both home and salon use. 

Key Features & Specifications

Variable Speed Control: Adjustable speeds ranging from 2,000 to 20,000 RPM.

Multifunctional Tool: Used for shaping, buffing, grinding, and polishing both natural and artificial (acrylic/gel) nails, as well as callus removal.

Safety & Protection: Features built-in automatic overload protection to prevent overheating.

Directional Control: Includes a switch for both forward and backward rotation.

Quiet Operation: Designed for low noise, low heat, and low vibration To use the M-838 Professional Nail Drill safely and effectively, follow these standard operating steps for high-performance e-files:

1. Setting Up the Handpiece

Insert a Bit: Most professional handpieces use a twist-lock mechanism. Twist the middle of the handle (usually toward "R" or an open lock icon) to open the chuck. Insert your 3/32" drill bit and twist it back (toward "S" or a closed lock) until it clicks.

Note: Never turn the drill on without a bit or the protective pin inserted, as this can damage the motor.

Connect: Plug the handpiece cable into the port on the main control box.

2. Basic Operation

Power On: Press the power button or turn the speed dial clockwise to turn the unit on. The LCD screen should light up, showing the battery level and current RPM.

Adjust Speed: Slowly turn the dial to increase the speed.

Low (5,000–15,000 RPM): Best for natural nails and cuticle work.

Medium (15,000–25,000 RPM): Ideal for shaping gel or acrylic.

High (30,000+ RPM): Used for removing bulk material or thinning thick acrylics.

Rotation Direction: Use the F/R (Forward/Reverse) button to change the direction.

Forward is typically for right-handed users.

Reverse is for left-handed users or for specific angles on yourself.

3. During Use

Keep it Moving: Never let the bit sit in one spot on the nail, as the friction will quickly create a "heat spike" and burn the nail bed.

Use Light Pressure: Let the speed of the drill do the work. Pressing down too hard can cause the bit to "jump" or damage the natural nail.

Angle: Keep the bit parallel to the nail surface to avoid digging "rings of fire" into the nail.

4. Charging & Maintenance

Charging: Use the provided cable to charge. The display will show when the battery is full.

Cleaning: After use, wipe down the handpiece and control box with a soft cloth. Use a small brush to remove dust from the chuck area to prevent clogging.for a smoother experience.