Brand: Modular | Similar products from Modular
UGX 10,500
UGX 20,00048%
1 units left
Get your order in 4 hours
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Enjoy fast delivery in main cities
Choose your location
Get your order in 4 hours
Instant Delivery
Delivery Fees UGX 10,400
Pickup Station
Delivery Fees UGX 2,400
Ready for pickup on 20 November if you place your order within the next 7hrs 31mins
Door Delivery
Delivery Fees UGX 3,500
Ready for delivery on 20 November if you place your order within the next 7hrs 31mins
Return Policy
Free return within 7 days for eligible items.Details
Seller Information
Jumia
100%Seller Score
Product details
This Type C module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by lithium batteries.
This module uses the TP4056 / TC4056 Li-Ion charge controller IC and a separate protection IC. There are other types of modules on the market that use the TP4056 / TC4056 but lack any protection circuits or ICs to provide the necessary protection needed with lithium batteries. This module uses both the TP4056 / TC4056 and the DW01A Li-Ion battery protection IC, which together in combination provide the following protection features:
- Manage the constant current to constant voltage charging of a connected lithium battery
- Over-discharge protection - keeps your battery from being discharged below 2.4V, a healthy minimum voltage level for your battery
- If a connected battery has been discharged below 2.4V the module will cut output power from the battery until the battery voltage has been re-charged above 3.0V (the over-discharge release voltage), which at that time the module will again allow discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows charging of the battery to occur through the parasitic diode of the discharge control MOSFET (FS8205A Dual MOSFET).
- Overcharge protection - the module will safely charge your battery to 4.2V
- Overcurrent and short-circuit protection - the module will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs
- Soft-start protection limits inrush current
- Trickle charge (battery reconditioning) - if the voltage level of the connected battery is less than 2.9V, the module will use a trickle charge current of 130mA until the battery voltage reaches 2.9V, at which point the charge current will be linearly increased to the configured charge current.
Specifications:
Model Number:796431
Product Name: Charging Board
Condition:100%
The Input Voltage: 5V
Maximum Charging Current: 1000 mA
Charge Cut-off Voltage: 4.2 V + / - 1%
The Overcharge Protection Voltage: 2.5 V
Over-current Protection Current: 3 A
Input Interface: Type C
Size:27mm*17mm
Specifications
Key Features
original
Specifications
- SKU: MO639IP4SY3TINAFAMZ
- Weight (kg): 0.001
Customer Feedback
This product has no ratings yet.
/product/90/4852062/1.jpg?3285)
Modular TP4056
UGX 10,500
UGX 20,00048%
Questions about this product?
/product/90/4852062/1.jpg?3285)
/product/90/4852062/2.jpg?3285)