915 Generation 1 Set 4CH 40MHZ Remote Transmitter Receiver Board with Ant

Detailed Information About The Product:

Frequency: 40MHZ
fire board operating voltage: 3V;
receiver board operating voltage: 4.5v-6v;
Maximum output voltage of the receiving board: 4 lines, 2 groups, 2 sets, output two voltages, the size is about 2v-3.5v, respectively control one motor forward and reverse, 3V voltage motor can be used.
Features: The two voltages of the output may have different sizes. When the battery is low, it may be obvious. Therefore, it is recommended to use the small voltage separately for the steering motor. The remote control distance is sufficient when the power is sufficient. , no interference, after connecting the antenna correctly, about 10 , the above is for reference only.
Wiring:
1) The transmitting board: the V is connected to the pole of the power supply, the black line V- is connected to the negative pole of the power supply, and the ANT is connected to the antenna;
2) Receiving board: the black line is connected to the negative pole of the power supply, the is connected to the pole of the power supply; the yellow line is connected with a blue line to connect one motor two long wires are connected to the motor 1, and two short wires are connected to the motor 2).
colour:Orange
Material:Metal plastic
size:Launch board: 3.8*5.8cm
Receiver board: 2.6*4.3cm
Package Contents:
1 x 40mhz Transmitter Board
1 x 40mhz Receiver Board
2 x Antenna
2 x Screws with nuts
Note:
This version of the two-way output is basically the same, suitable for the -motor with the blocking current 2A, and the other 27M board of the can be used at the same time without interference.
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is /- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please dont be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !