915 Generation Metal Hold Down Brackets and Pins Blind Brackets Blind Holder Repments for Horizontal Blind Shades Window

Durable these metal hold down brackets are made of metal materials strong durable and lightweight easy to install and less likely to deform or They are suitable for most blinds or windows and can you for a long time
Appropriate size It is suitable for most blinds and does not take up too much space ordering check the size carefully and make they can match your windows or blinds
Simple design blind hold down brackets are simple in design small in size thus they are difficult to be noticed Using to hold down most blinds will not affect the overall appearance of the blinds and you can enjoy the beautiful scenery from the windows as
Easy to apply the installation and application of these tools are rather easy and convenient you put the pins into the holes of the brackets and then reinforce and you can successfully apply For more details refer to the installation steps
Proper simple appearance These metal hold down brackets are simple in design small in size thus they are difficult to be noticed Using to hold down most blinds will not affect the overall appearance of the blinds and you can enjoy the beautiful scenery from the windows as

Installation procedures
1 What you need drill screwdriver tape measure hammer pencil
2 If the bottom rail is not fitted with pins drill a 12 inch deep 764 inch or 332 inch bit in the center to hold pins on both sides of the rail
3 Punch the pins in
4 Put the blind plate down put the bottom rail flat in p and the position of the fixed bracket with a pencil
5 Screw the bracket to the door
6 Measure the position of the bracket now screwed to the door and on the other side
7 Then repeat the above steps to installthe second bracket
colour silver
Material metal
Size About 42x322mm

Package Contents
4 x Hold down brackets With screws
4 x Pin

Only the above package content other products are not included
Note Light and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm