Ascent HB33 Bayonet petal flower lens hood for Nikon AF-S DX 18-55mm f/3.5-5.6G VR II / 18-55 mm F3.5-5.6 G VR

Hood is widely used in backlighting photography, generally avoid glare. However, if the light from the past, still occur glare phenomenon, this time, you can hand side where the light shielding hood, glare is eliminated, can be in the viewfinder directly observe the effect. In addition to the optical quality of the lens itself outside the hood of the effect is very obvious, do not use the hood pictures regardle of color, sharpne and contrast are not ideal, and the use of the hood of the picture in a few aspects of a good performance. Little Hood, the effect is a big difference

4, to prevent accidental damage to the lens, also avoid finger inadvertently lens surface, but also to a certain extent for the lens block the wind, rain and snow.3, in the light photography or night photography, to avoid the interference of light entering the lens.2, in the light and side light photography along, avoid scattering light into the lens.1, in the backlight, side light or flash photography, it can prevent non-image-forming light to avoid the mist.[Product effects:

!)hood There are many models, be sure to use your exclusive lens hood. (The shorter the focal length of the lens, the greater the angle, the shorter the lens hood as a standard lens hood cap on the use of wide-angle lens, is bound to have consequences around the screen can not be imaged.)

fitted hood, you can also install the UV lens and lens cap.

hood when not in use, you can buckle on the lens, not only effectively protect the camera lens, also easily stored in your camera package.

The production of envmentally friendly ABS plastic, not recycled waste. (There are some hoods on the market price of the reason is very , mainly to do with the time expected.)[Name]: Hood HB-33

AF-S DX 18-55mm f/3.5-5.6G ED (52mm)Applicable lens:Hood HB-33