Dan Dai 220V Electric Pen Tool Carving Pen Plotterhine

Features:

*Works great on metals, china, gla, plastic and other hard material.

*Using the tyal alternating current of frequency cycle, the equment generates high-speed vibration to drive the high-hardne metal bit to engrave.

*The speed can be adjusted to meet the requirements of different materials.

*Pen design, hold and engrave just like writing, easy to operation.

*Mechanical princle: The forced vibration (up and down vibration) is generated by the periodic characteristics of AC frequency to drive the pen t to work, so there will be certain tolerable noise during the work.

*It can engrave any permanent patterns and characters, with a large concave depth, which can reach up to 1mm according to the material hardne.

*It is widely used for carving on the surface of almost all materials such as metal, jade, gla, plastic, marble, wooden, etc.

Specifications:

Product name: Electric

Material: Metal + Rubber

Color: Black

Plug: European standard

Volt/Power: 220V 40W

Supply Voltage: 220V

Max. Power: 40W

Output Current: 0.1A

Pen Bit: 3mm

Depth: 01.1-0.5mm

Repeat Depth: 0.3-0.8mm

Suitable for: ing Ts on Metal Wooden Gla Plastic Ceramics

Quantity: 1 Pc

Instructions:

1. When in use, hold the body with your hand, tilt it at an angle (about 45 degrees) like writing with a pen, and p your hand on the table, do not pre down hard when writing, the writing speed is slightly slower than usual. Move the carving on the real object.

2. Leave a trace where it croes.

3. According to different materials, adjust the gears reasonably.

4. Master its performance through repeated to meet the font size and depth requirements of different materials.

Caution:

1. Continuous work should not exceed 20 minutes to avoid damage to the . Intermittent use can ensure the life of the body.

2. When the housing is heated, it should be used ar cooling.

3. Turn off the power supply when not in use!

Package Included:

1 × Electric

Note:

1.Transition: 1cm=10mm=0.39inch.

2. The real color of the item may be slightly different from the tures shown on website caused by many factors such as brightne of your monitor and light brightne.

3. Please allow slight manual measurement deviation for the data.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.