Motorcycle Battery Charger 6V 12V Pedal Lead-acid Battery

Motorcycle battery charger 6V 12V pedal lead-acid battery full intelligent repair multi-purpose charger
△Introduction▽
• Microprocessor Control (CPU).  
• 3-STAGE AUTOMATIC CHARGING: 
• This is a fully automatic battery charger with 3 charge stages. 
• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely. 
• 3-stage chargers are suitable for most battery types including Calcium, and AGM, Wet batteries. They may also help restore drained and sulphated batteries. 
• Types of batteries: Most types of lead acid batteries including Calcium, and AGM, Wet,EFB, etc.. 
• Switchmode technology: Yes 
• Polarity protection: Yes 
• Output short protection: Yes 
• Non battery link protection: Yes 
• Over voltage protection: Yes 
• Over temperature protection: Yes 
• Cooling:  Natural cooling 
• Input voltage: 100-240V AC, 50-60Hz 
• Rated output: 6V 2A / 12V 2A 
• Minimum start voltage: 7.0V 
• Battery range: 4Ah - 40Ah 
• Thermal protect: 65'C+/-5'C 
• Efficiency: App. 85%. 
• Compliant standards: CE, IEC60335, EN61000, EN55014 
• Dimension (L×W×H): 130×75×50mm 
• Weight: 280g 
♠Features♥
LCD Display:  Charge Voltage,  Charge Current, Battery Full  etc..
Charging for 12V Battery
Charging for 6V or 12V Small Battery.
Repair Mode (Time: 16hours)
An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.
Output short-circuit protection. Display: ERO
Reverse connection protection. Display: ERO
Charger With EU-plug.
AC cable length: 55cm,    DC cable length: 55cm.
 
⇉Package⇇
1 Set = 1pc Charger + 1pc Manual + 1pc Color Box