General PowMr 10A 24~72V Boost MPPT Controller

PowMr 10A 24/36/48/60/72V Boost MPPT Controller Overcharge Short Circuit and Reverse Current Protection LCD Display Silent operation

Note:This is PowM's latest step-up solar charge controller, which uses a boost converter circuit, a complex circuit that intelligently boosts the voltage output of the solar panel to match the battery with the optimal charging voltage according to the demand. And by precisely regulating the voltage, the controller maximizes energy transfer efficiency, capturing every watt of available solar energy.

• 1. LCD display
• 2. Function Keys
• 3. PV input port
• 4. Battery port
• 5. Install holes
• 6. Heat sink
• 3.3 Connection Steps
• Step 1. Battery Wiring
• Prioritize connecting the battery module before connecting the photovoltaic array. Install a separateDC circuit breaker for the battery charging circuit.Step 2. Photovoltaic Wiring
• After confirming that the configured photovoltaic array voltage falls within the acceptable range ofthe controller, connect the photovoltaic array. Install a separate DC circuit breaker on thephotovoltaic input line.
• Step 3. Controller Startup
• Once the battery and photovoltaic array are connected, check for any reverse connections or looseconnections in the cables. After confirming everything is correct, sequentially close the circuitbreakers for the battery charging circuit and photovoltaic input circuit to start the controller.