General PowMr PZEM AC 6in1 220V Digital Ampermeter Power Energy

Name: PowMr PZEM AC 6in1 220V Digital Ampermeter Power Energy
Brand: General
Price: 55477.75 UGX
Availability: InStock

Brand: General | Similar products from General

UGX 55,478

UGX 56,4782%

Few units left

+ shipping from UGX 17,431 to Central Business District

0 out of 5

(No ratings available)

Promotions

Check out brand new computing deals Now Shop hot Clearance Deals as low as 5k!

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees UGX 17,431

Ready for pickup between 07 June & 12 June when you order within next 16hrs 11mins

Door Delivery

Delivery Fees UGX 24,331

Ready for delivery between 07 June & 12 June when you order within next 16hrs 11mins

Return Policy

Free return within 7 days for eligible items.Details

Warranty

Seller Information

PowMr

New Seller

1 Followers

Seller Performance

This seller does not have enough history for us to evaluate his performance yet

Product details

PowMr PZEM AC 6in1 220V 100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT pzem-022
1.Power: test range: 0~22000W,Startingmeasure power:0.2W
＜10Wdisplay format:1.00~9.99W
＜100Wdisplay format:10.0~99.9W
＜1000Wdisplay format:100~999W
＜10000Wdisplay format:1.00~9.90kW
≥10000Wdisplay format: 10.0~22.0kW
2.Energy: test range: 0~999kWh
＜1kWhdisplay format:0~999Wh
＜10kWhdisplay format:1.00~9.99kWh
≥10kWhdisplay format: 10~999kWh
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A,Starting measure current:0.001A
＜10Adisplay format:0.000~9.000A
≥10Adisplay format:10.00~99.99A
5.Frequency: test range: 45~65Hz
Display format:45~65Hz
6.Power factor: test range: 0~1PF
Display format:0.00~1.00PF
1.Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key for 5 seconds until the energyvalueflash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
Step3:Ifthere is no operation on the key within 5 seconds,it means the energy value is not cleared and will exit the reset state.
3.Set power alarm threshold
Step1: Long press the key until the LCD screen display“SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the rangeof active power threshold is 0.0～2.5kW.