1-3PCS HC-SR501 Small Adjust IR Pyroelectric Infrared Mini High Sensitivity Module Motion r Detector Module For Arduino

Descrtion:

1. automatic induction: when someone enters its sensing range input high, people leave the r range automatic delay off high. Output low

2. photosensitive control (optional): module is reserved for the location, you can set the photosensitive control, daytime or light sensing. The photosensitive Control optional features not installed at the factory photo. If neceary, please purchase separately photo install it yourself

3. two trigger modes: L can not be repeated, H can be repeated. Jumper selectable, default is H

A. not repeat the trigger mode: the r output high, the delay time has elapsed, the output automatically from high to low.

B. repeatable trigger mode: the r output high, the delay period, if human activities within its sensing range, the output will always remain high until people leave only delay the high level goes low (r module detected after every activity of the body's automatic postponed a delay period of time, and the last time activities as the starting point of the delay time)

4. induced blockade time (default setting: 0.2 seconds): sensing module in every r output (high to low) followed by set up a blockade of the time, in this period of time the r is not receiving any induction signal. This feature can be achieved both of the (inductive output time and the blocking time) interval can be applied to the interval detection products; This feature can effectively suppre the various interference generated in the proce of load switching

5. wide operating voltage range: default Voltage DC5V to 20V

6. micro-power: quiescent current of 65 microamps, particularly suitable for battery- powered electrical products

7. output high signal: easy to achieve docking with the various types of circuits

Instructions for use:

1. Sensing module is powered initialization time of about one minute, during which the module will output 0-3 times the interval, one minute after entering standby

2. Should avoid lights and other sources of interference the a close direct module surface of the lens, in order to avoid the introduction of the interference signal malfunction; using the environment as much as poible to avoid the flow of the wind, the wind will cause interference r

3. Sensing module uses dual probe, the probe window is rectangular, dual (A $ B $) in the long direction at both ends, from left to right or from right to left when the body is walked by infrared spectroscopy reach the dual time, distance difference, the greater the difference, the more sensitive the induction, when the human body from the front to the probe or from top to bottom or from the bottom to the previous direction came dual detection distance of le than infrared spectroscopy, no difference value, the r should be installed up to the direction of the probe dual direction with human activities as parallel as poible to ensure that the human body has been paed by the probe dual induction r insensitive or does not work; Round lens in order to increase the sensing range of angles, the module also makes the probe surrounded induction, but the left and right sides still up and down both directions sensing range and sensitivity, still need to try to install the above requirements

PLS NOTE that due to lighting effects, monitor's brightne / contrast settings etc, it could be some minor differences in the hue of the images and the actual item

Specifications:

Article-Nr.:2802164

Product Details:Human Infrared r Module

Condition: New

Product Feature:Probe LHI778, high sensitivity

Technical parameters:

1.Operating voltage: DC5V to 20V

2.Static power consumption: 65 microamps

3.Level output: 3.3V, low 0V

4.Delay time: adjustable (0.3 seconds to 18 seconds)

5.Blockade Time: 0.2 seconds

6.Trigger Mode: L can not be repeated, H can be repeated default value H

7.Sensing range: le than 120 degree cone angle of le than 7 meters

8.Operating temperature: -15 to 70 degrees

9. Dimensions: 32 * 24mm, screw hole distance 28mm, screw aperture 2mm r lens size: (diameter): 23mm (default)

Package Included:

1 x Human Infrared r Module

2 x Human Infrared r Module

3 x Human Infrared r Module

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.