1.5 Inch 128x128 OLED LCD Display Full Oled Module Driver IC SSD135 For Arduino

1.5 inch OLED Display screen with 128x128 Resolution,,Parallel Interface,SSD1351 Controller 30PIN

Specifications:
Model: gdedf11 UG - 2828
Type: TFT type LCD screen
Size: 1.5 inches
: 262 k
Brightness: 90 CD/M
Contrast: 90:1
Resolution: 128x 128
: 10923 ppi
Point pitch: 0.22 (mm)
Response time: 25ms

Precautions
First, on with FPC / COF / TCP for OLED products needed in the design of some of the considerations when bending
1 Please note that the design of the FPC bending angle and bending space, do not fold the FPC die .
FPC is easy to make too tight bending , causing no display.
Follow the sections of the modular design of the reference specifications to design the label on the Drawing .
The following figure, and OLED glass edges ≥ 1.83mm, the bending angle was the natural bent.
Second, on with FPC / TCP welding of OLED products in some of the considerations
A recommended way of using the Hot-bar yield to ensure
Standard welding conditions: temperature 180-210deg time 10 sec
(2) Use electric iron Instructions:
Before welding Panel checks. Visual inspection , Pin feet without breaking ;
Electrical inspection , testing, screen displays normal welding operation
In the / FPC 's Pin feet evenly on the tin
With a hole on the right place, and fixed FPC / TCP, ensure the welding does not move when
Add flux, using iron tip temperature , temperature 300-350deg.
Repeated should not exceed three times,
at the same point dwell time shall not exceed 3 sec, an interval of five minutes each repetition .
After welding inspection. Check Pin foot shift , poor welding , residues, and make appropriate adjustments.
3 . Operation Note :
Using tip iron tip iron can not be used to prevent damage to FPC / TCP Pin directions .
Using heated iron , requiring temperature is too low and will not stick to Pin feet.
Using flux can reduce Weld, or even welding cold welding
Because TCP / FPC 's Pin foot fracture can not be repaired , so when used not bend or pull Pin Pin .








a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a