10Mx0.53M 3D Non-woven Brick Wall Sticker Self-adhesive Wrap

Specification: Material: Non-woven Color: Deep Grey, Light Yellow, Scarlet Size: 32.8*1.7ft Wear-resistant, Breathable, Environmental protection,Durable Suitable for the scene: bedroom, clothing store, bar, restaurant, cafe and so on

Usages: 1. The wall has been handled well painted wallpaper paste special base film, and let it dry. 2. to draw a vertical line from the ceiling to the floor, this line as the first piece of wallpaper paste edges. 3. According to a desired size cut a good wallpaper, and turn the cut wallpaper in order, and then compare the color dark to light carefully then the cut wallpaper should be arranged from dark to light or from shallow to deep, marked with serial number on the back. Note contrasting colors, so as not to stick wrong. 4. To brush glue evenly over the back of the wallpaper, you must brush the edge of the wallpaper, we can not stick to the front of wallpaper, to ensure a clean surface, avoid the risk of wrinkles. Over 3-5 minutes, then wallpaper soaked, the wallpaper can be pasted on the wall. Wallpaper paste to the wall, it should be removed bubbles, wrinkles and excess glue carefully, to use hard scrubbing brush, brush from the middle to both sides. When glue Stick on the positive of wallpaper used cloth to wipe it immediately. 5. Wallpaper should be affixed in a dry wall, the front of the wallpaper can not wipe with a damp cloth, to avoid fade after wet.

Package included: 1 x 3D Effect Wallpaper