12V 1000ml Stainless Steel In-Car Kettle Electric Portable Heated Water Cup 12V

Product description The design of quick heat and boiling water, safety circuit. Model:843985 Name:Vehicular Kettle Car Electric Pot Material: Stainless Steel ,Plastic Size: Approx.23.5cmx12cm/9.25''x4.72'' Voltage: 12V/ 24V Water burning time: 12V About 45 minutes 24V About 20 minutes Capacity: 1000ml
Applicable: For 12V/24V vehicle
Operation instructions: Put the water in, cover the lid, insert the holder plug into the socket,the red light begins to heat up, and after 100℃, it will automatically down to heat. The green light is on. Matters needing attention： 1. Before using the kettle, please do the dry cleaning (Washable inside of the cup ). The electrical components do not enter the water or wet, to prevent short circuit damage. 2. Can use a specified supply, that is to distinguish 12V and 24V from mixed use. 3. Do not dry burn the water,the heat pipe should be completely immersed in the water，the minimum water level should not be less than 1/3 of the internal bladder. 4. The water level should not be higher than the parts of the stainless steel body so as not to overfill. 5. After the burning, pull out the , and then press the water outlet switch.
Package Included: 1 x Car electric pot withcigarette holder plug 1 x Fuse
-Please allow slightly error due to manual measurement，thank you！






a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a