12V Lead- Lithium Battery Charger Module 6-60V 20A 30A LCD Display Automatic Charging Control Overcharge Protection Board-30A

Product Parameters:

Product model: XY-L10A,XY-L30A

Control voltage: DC6~60v

Control current: ≤10A/30A (as you choose)

Control accuracy: 0.1V

Output type: direct output

Voltage error: ±0.1V

Use range: various battery lithium batteries

Appearance size: 79*42MM

6-60V any battery, lithium battery can be used

LCD display, battery voltage, charge percentage and charging time at a glance

The function is very powerful, it can automatically charge control, can control the charging time, and can set and upload the corresponding parameters through the serial port

Parameter Settings：

Pre and hold the SET on to enter the parameter setting interface, the LCD will display SET;

After entering the parameter setting interface, switch the set parameters by short preing the SET on;

After selecting the parameters, you can use the UP/DOWN on to set, support short pre, long pre (rapid increase or decrease);

If you want to set other parameters, repeat steps b), c);

After all the parameters are set, pre and hold the SET on to exit and save;

First, the function descrtion:

1. Automatic charging control function:

By setting the upper limit voltage UP and the lower limit voltage dn; when the battery voltage ≤ the lower limit voltage dn, the relay is turned on, the charger starts to charge the battery; when the battery voltage ≥ the upper limit voltage UP, the relay is turned off, and an automatic charging is completed;

2. Charging time control function:

How to turn on time control?

After entering the parameter setting, if the setting parameter OP is not 0, the time control function is enabled. The default parameter of the OP is: -----h, the time control function is not enabled by default;

After the time control function is turned on (OP is not 0), when the battery voltage < lower limit voltage dn, the charger starts to charge the battery, and the system starts timing; during the timing, the battery voltage ≥ the upper limit voltage UP, the relay is turned off; if the battery voltage