1750W Electric Nail Woodworking Nailer Straight Nail Nail

This product is suitable for indoor decoration, furniture making, Ad. board installation as well as wooden case, model board making, ect.
Specification:

Voltage: 220-250V

Frequency: 50-60Hz

: 1750W

Weight: 1.65Kg

Cooling: Cooling Aperture

Operation Frequency: 130 per min

Speed: One nail/s, maximum six nail per second

Nail: F10,F15,F20,F25,F30. 10-30 MM straight nail can be used. (without included)


Features:

1, The patent technology features creation and excellent in performance.

2, Small in size,light in weight and portable.

3, Low in working noise,suit for indoor decoration in residencial area.


Operation Instructions:

A. Nail Assembly

1,unplug the unit, to avoid any damage caused.

2,Choose suitable nails.

3,Pull the magazine off,assemble nails correctly,push the nails forward to the nose,then close the magazine, be sure to lock it firmly.

B.Firing Operation

1,Normally, the tool is used for wooden nailing together.

2,After assembling the nails, the nose of the nailer is flat against the workpiece and kept in right angle.

3,If the workpiece is too hard to in, please press it with more strength and vice versa, so as to keep the nails inside the workpiece properly in depth.
4, Don't the nailer without nails, so as to prevent the parts in the tool from damage.

. Tool Maintainance

1,Please clean and maintain the tool regularly, to keep the magazine and the nose of the nailer clean without any dirty.

2, The copper centre section inside the extension cord should be more than 1.25mm square, or will decrease the .

3,Continuously use the tool can cause the motor overheat, wait until it cool down naturely,the use it again so as not to burn down the motor,

4,Don't dismentle the tool wilfully, to avoid it to be damaged.

5,In case the tool can't be used normally, send it to the repairing centre to have it repaired in time.



Safety Details:

1.Before use the tool, please read the operating manual in detail.

2.It is prohibited that children and persons who don't know how to use it properly to use the tool.

3.To avoid the leakage of electricity,it mustn't be used in moist places or rain weather.

4.Don't use the tool beside conbustibles and inflammables, to avoid dangerous event.

5,In order to protect your eyes, please wearing safety Eye-proof Glasses.

6,When put nails into or take them out of the magazine as well as non-operation conditions,please lock the safety switch. It's prohibited to the nailer at human,it may cause accident.

7,when you stop using or repairing it,please unconnect the ,take out the remaining nails.

8,This tool can be used on wooden, It can't be used on ,or hard substances.








a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a