1CH Tuya Smart Wifi Gate Garage Door Self Lock Switch,DC 12V 24V 32V,1 2 Channel Inching Module Relay,Alexa Alice RF433 es

1 Channel Wifi Relay(Two Working Modes)

2 Channel Wifi Relay(Three Working Modes)

Upgrade

The new version 1 channel and 2 channel relay have external interfaces, which can be used to connect to push on switches.

Use for

1.ely give a pulse signal to turn on and turn off Lights,Lamps.PC and other home appliance. 2.ely give a pulse signal to turn on and turn off Garage Door,Door Acce,sliding Door. 3.ely give a pulse signal to control DC Motor,AC Motor to Forward and Re(ONLY 2 CHANNEL RELAY SUPORT)

Note

1.The relays is paive output(dry contact), No matter how many power souce you supply in the input, the output don't have any voltage, you also need to supply power source in output. The power source supply in the iutput just can make board work.if you do not supply power source in output, the connectted device can't work.

1 Channel Relay Overview

Type 1,2,3

Type 4,5,6

The RF433 e controller don't include battery Battery Type 1:27A 12V (4 on RF433 e Controller) Battery Type 2:CR2032 The ture of the battery is in the end of the page

1 Channel Relay Upgrade

If you need to make the RF433 e controller work with the module,you need to add the remtoe controller in app. Open Tuya Smart Or Smart Life APP Click "setting">"RF e control setup">"Add"

Two Working mode

1 Channel Module support Inching Mode,Self-locking mode 2 Channel Module support Inching mode,Self-locking mode,Interlocking Mode.

1.Inching mode : Switch on one channel,the channel will be automatically closed after 0.5 seconds .Other channel also can enter into Inching mode 2.Self-locking mode : Each channel could be switched on/off seperately.You can turn on/turn off all channel at the same time.

Features:

【Two Input Ports】 You could choose USB 5V port or the screw terminal port to supply power in the input to make the board board work. 【Dry Contact/Paive Output】 No matter the power you supply in the input, the output don't have any voltage If you do not supply power in output port, the connectted home appliance can't work, you also need to supply power in output. 【Timer】 The connectted home appliances can be automatically turned on/off according to the time schedule. Each channel can set different time schedule.

If you need to change the working mode,you need to change the working miode in app..

Function

【APP e Control】 Tuya or smart life APP can be used to ely turn on/off the device. You can check the working state of the device in APP anywhere and anytime. 【Mobile Phone Control】 When you go outside or at home,You could control the device by your smart phone with WIFI or 4G mobile network. (Note:The router need to online.The WIFI module need to keep a close distance with the router and the wifi module need to online in Tuya Smart Life APP) 【Voice Control 】 Compatible with Alexa and Google Aistant, you can use the voice control to turn it on/off. 【Timer】 The WIFI module can be automatically turned on/off at a special time you set. 【Multle Share】 One device can control by Multle phones,one phone can control Multle smart device.

Battery of RF433 e Controller

Battery Type 2:CR2032

Inching mode

In inching mode, you can have two wiring ways to select: -The first wiring Diagram is turn on 0.5seconds and then auto-off . The second wiring Diagram is turn off 0.5seconds and then auto-on.

How to change the Inching time on the APP?

Please make sure the device enter self-locking mode firstly, and then you can set the inching time on the APP.The time range is 1-3659s. The inching time only available in self-locking mide or interlocking mode.

Time Schedule

The WIFI module can be automatically turned on/off at a special time according to the time schedule you set.

Voice Control by Alexa and Google Home

Try these phrases ( {deviceName} should be the name of your device): “Alexa, turn on {deviceName}” “Alexa, turn off {deviceName}” “Alexa, schalte Ger?tename ein” “Alexa, schalte Ger?tename aus” Also you can ask Google Home to control the device with the following voice commands. “hey, google, turn on {deviceName}” “OK, google, turn off {deviceName}”

Restart Statu

When you make the module reconect to the power,you can set the restart status according to your need.

Wiring Diagram For Door Acce

Wiring Diagram For electric motor lock

Specification

Input 1 (Screw Terminal Port):DC/AC 7V-32V Input 2：Micro USB 5V Input Output:Paive Output(Dry Contact) Max.Current:2200W/10A WIFI Standard:2.4GHz(don't support 5GHz) Size:69*41*20mm

2CH Module Features:

*Supports WiFi network: supports us WiFi smart switches on one smart phone. *Supports status tracking: device status timely feedback to the Tuya / Smart life APP. *Supports ely turn on or off the connected appliances, for example light, electric kettle, electric rice cooker, electric curtain, acce control, etc. *Supports scheduled/countdown/loop timers for each device. *Voice Control: Compatible with "Amazon" Alexa, for Google Home.

How to pair RF433 e controller with the relay

Open Tuya Smart Or Smart Life APP Click "setting">"RF e control setup">"Add" When there show prompt interface,you need to pre the on of e controller for 2 seconds. Then loosen the on,and it will finish pairing succefully.

2CH WIFI Module Specification:

Cutover current≤ 10A Input 1 (Screw Terminal Port):DC/AC 7-32V Input 2: Micro USB 5V Input Output:Paive output ( Dry contact switch) Working Temperature: -20 to 70degree Working Humidity: 40% to 80% RH WIFI Standard:2.4GHZ, IEEE 802.11 b/g/n(don't support 5G) Size:120*38*25mm APP:Tuya/Smart Life Wirle switch battery:Cr2032(Not include) RF433 e battery:27A 12V(Not include)

Three Working Mode

1.Inching mode : Switch on one channel,the channel will be automatically closed after 0.5 seconds .Other channel also can enter into Inching mode.(you only can change the inching time range in the APP under the self-locking or interlocking mode) 2.Self-locking : each channel could be switched on/off seperately.You can turn on/turn off all channel at the same time. 3.Interlocking mode : Switch on any channel , other channels will be switched off automatically .

How to set Inching on the APP?

Note: Please make sure the device enter self-lock mode before you set the inching time on the APP.

2CH Wiring Diagram

Product Descrtion

Note:

The manufacture added a Micro USB5V port to the device, just for testing purposes, we do not recommend using it. If you want to use the USB5V port, you need to remove the shell to use it just like the ture show. We will delete this USB5V port in subsequent versions, sorry for the inconvenience caused.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.