1PCS 4-pin 0.96-inch OLED display screen with blue white yellow and blue dual colors 128X64 1306 1315 IIC communication

Attention: All the above products come with a box and arrangement, with a box and arrangement

In 12022, the old gla with SSD1315 ic was newly launched, which is the same size as the old gla with SSD1306 ic. The 1306 ic can be repd by the old gla with 1315 ic, because 1315 ic is cheap.

2. There is also a narrow edged gla with a 1315 chip, which has a relatively narrow gla frame but the display area size is the same.

Kind reminder:

Driver IC Compatibility Description: Most SSD1315 is compatible with SSD1306. If customInterface definition:ers who ly used the 1306 driver want to rep SSD1306 with SSD1315, it is recommended to confirm with a sample before purchasing in bulk!

VCC (positive pole of power supply)

GND (negative pole of power supply)

SCL (IIC Clock Line)

SDA (IIC data cable)

Note: The order of pins 1 and 2 can be changed through the jumper point on the back of the board.

Product Description:

Resolution: 128 * 64 (no backlight required, display unit emits light)

Visual angle: greater than 160 ℃

Low power consumption: 0.06W under normal display

Wide power supply range: Both sets of voltages, 3.3V-5V DC, are available

Industrial grade: working temperature -40 ℃~80 ℃

Small volume (length, width, thickne): 27.mm * 27.9mm * 3.9mm

Communication method: IIC or (I2C)

Brightne and const can be controlled through program command

The service life shall not be le than 16000 hour

OLED screen built-in driver chip: SSD1306

Supports numerous control chips: fully compatible with , 51 series, MSP430 series, ST2/, CSR chips, etc

ant note: OLED displays are different from LCDs; OLED is s luminous; So without backlight, the screen will not have any response when only powered on; There must be a program that operates correctly in order to display, and everyone needs to pay attention to this!