1Set Baby 3D Hand Foot Print Mold Powder Baby Growth Memorial Plaster Casting Kit Handprint Footprint Keepsake Gift

3D Baby Hand Print Foot Baby Casting Keepsake Kit Handprint Footprint Baby Growth Souvenirs Memorial It Required: 1 x Plastic container large enough to submerge your baby's hand or foot in the molding liquid. You can also use a clear strong plastic bag if you do not have a container. 1 x Smaller plastic bowl to mix the plaster Mixingspoon Timer

Ingredients: 1 x100g bag of plaster 1 x100g bag of molding powdermix 300to320mL of warm water to mix the molding powder ( 3 to 3.2 times the amount of powder) 80to90 mL of warm water to mix the plaster powder (1/3 to 1/2 of the amount of powder)

ANT: Do not add too much water to the powder mixtures or they will NOT set correctly and your casting will not be succeful.

INSTRUCTIONS: 1.Mix the molding powder with3to3.2times the amount of powder (300to320mL). Stir quickly until mixture is as smooth as poible. The mixture will turn a purple/pink color. Remember not to add too much water to the mixture. 2.After 1 minute, place baby's hand or foot into this purple molding mixture at once. Please make sure the hand or foot is completely submerged, and doesn't break the surface of the mixture or touch the edge ofcup. 3.Try to keep your baby's hand or foot as still as poible while the molding mixture is setting. 4.Hold your baby's foot in the mold for 240 more seconds to ensure the mold is fully set, then you can very carefully and smoothly remove their hand or foot from the mold. 5.To ensure a smooth release from the mold, wiggle slightly back and forth so that air can enter the opening of themold. 6.Once the hand or foot has been removed, Open bag of plaster powder 50g, and mix with 1/3 to 1/2 of the amount of water (80to90 mL). Stir as quickly until the mixture is as smooth as poible. Do not add too much water to the powder. The higher the concentration the stronger the casting will be. 7. Slowly pour the powder mixture into the opening of the mold. Gently jiggle the mold while pouring to ensure the liquid enters all the tiny areas and to avoid air becoming trapped inside creating air bubbles. 8.After1hours the mixture should be set. VERY gently remove the mold away from the casting. You can very carefully use a to help open the moldor by hand. Ensure open it very slow to ensure that you do not break thecasting. 9.Once the casting is removed you may see a little powder on the surface. It can be washed by water, and air dry over 24hours. 10.Paint Coat: After 24 hours you can paint your beautiful completed casting youwish.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.