2 Axis Digital Readout Milling Lathe With Precision Linear Scale Grating Machine

Specification
Name: 2 - Axis Grating Milling Machine Electronic Scale Lathe Grating Digital
Model: SKU526145
Measuring travel: 0-3020mm
Accuracy class: ± 1um
Measurement standards: engraved glass grating
Operating voltage: 5V ± 5% DC
Working speed: ≤1m / S (1um)
Acceleration: ≤ 60m / s2
Reference operating temperature: -10 ℃ ≤70 ℃
Reference Operating Humidity: ≤ 90RH
Grating pitch: 20um (0.020mm)
Measurement procedure: Incremental
Signal mode: TTL
Circuit characteristics: NPN
Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm
Scanning frequency: ≤28kHz
Anti-vibration: 50Hz-2KHz, ≤ 180m / s 2
Impact: 16ms, ≤ 600m / s 2
Displacement frictional resistance: ≤ 5N
Protection class: IP53 / IP64
Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, ≤ 100M, can be connected to install the block)
Note: The above parameters are measured in the ideal environment. There may be some differences in practical application.

Features
The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. The repeatability of the measurement is more stable.
The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine.
Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant.
Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance.
Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life.
The sensor uses a glass precision metrology grating as the measurement reference.

Package Included
1 x Raster digital display
1 x set of brackets
1 x cable