2 In 1 Car Mobile Phone Holder Water Cup Beverage Holder

2 in 1 Car Mobile Phone Holder Water Cup Beverage Holder

1. Material: ABS, PC
2. Suitable car models: The cup holder is suitable for sizes below 73mm, and the mobile phone box is suitable for widths between 48-100mm.
3. Adopting a two-in-one design, you can place a mobile phone and a water bottle at the same time
4. The matching mobile phone clip is easy to install, plug and play, and can be removed at any time when not in use.
5. The cup holder can hold water cups with a diameter of less than 73mm, and the mobile phone holder can hold mobile phones with a width of less than 97mm.
6. There are four elastic silicone sheets in the cup holder, which can hold cups/bottles of most sizes so that the water cup will not shake when driving on bumpy roads.
7. Size: 155x121x161mm
8. Net weight: 303 grams
Installation notes:
1. Installed in the original cup holder of the car
2. Find a suitable cup holder, then adjust the cup holder base to the appropriate position and put it into the original car cup holder, then rotate the cup holder to pop out the fixing key in the base until it is fixed.
3. If the original position of the cup holder is not suitable for installation, you can unscrew the screws in the cup holder, then adjust the screw holes of the cup holder one step forward or left or right, and then tighten the screws
Precautions:
1. Do not install it in a position that affects driving
2. Please tighten the bottle cap after drinking water to prevent the liquid from sloshing out of the bottle during sudden braking