2 in 1 Digital Oscilloscope Multimeter Bandwidth 2.5Msps Sampling Rate Graphical Oscilloscope Resistance Meter ET828

Feature: 1. 2.5Msps high-speed sampling, 1MHz analog bandwidth (only ACV oscilloscope), 4000 code digital multimeter. One-key oscilloscope, there are three waveform scanning modes: auto/normal/single.
2. Data waveform retention function during measurement can store 100 groups of data and 10 waveforms. The parameters can be set independently during waveform measurement, such as time base, amplitude, waveform scan mode, etc.
3. Relative value measurement can effectively eliminate lead resistance, distributed capacitance or interference signals. Multimeter functions include DC/AC voltage/current, resistance, capacitance, frequency, duty cycle, diode/continuity test.
4. Automatic/manual range switching, real-time data and stored data are displayed on the same screen. Overload protection 500mA/10A double fuse, double protection meter.
5. Automatic sleep function without operation for 15 minutes. Adopt 2.4 inch color screen display, the display effect is clear. Panel calibration, memory calibration coefficients do not need potentiometer adjustment, higher reliability.

Specification:
Instrument characteristics and technical parameters:
Display: 240X320 color screen
Observation area: 49.0mm x 36.72mm/1.93x1.45in
Backlight: Always on
Input resistance: about 10MΩ
Battery: 3 X AA batteries (not included)
Automatic sleep: 15 minutes or disabled
Static working current: about 65mA
Sleep current: about 35uA
Continuous use time: more than 10 hours, (battery capacity/about 65mAh)
Storage capacity: 100 DMM data, 10 OSC waveform records
Use environment: 0 - +40 degrees Celsius; Less than 75%RH
Storage conditions -10 - +60 degrees Celsius; Less than 90%RH
Dimensions: 160x83x32mm/6.3x3.27x1.26in
size: 160x83x32mm
Material: ABS
colour: black

Package Contents:
1 x Host
2 x Test Leads kit
1 x English Manual

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.