2 PCS Tachometer Hour Meter RPM LCD Digital Display Motorcycle Bike Waterproof

Tachometer Hour Meter RPM LCD Digital Display Motorcycle Bike Waterproof

Base Function:

Digital Tachometer: Display range: 0-15,000RPM
Display internal: 0.5
RPM record: Display range: 0-15,000RPM
RPM input pulse: Display range: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6
Total engine hour meter:
Display range: 0-99999H
Display unit: 1H
Hour meter A/B: Display range: 000.0-999.9H
Effective temperature range: -10℃ - +60℃
Meter size: 62x34x16.4mm (LxWxH)
Cable Length: approx. 195cm
Voltage Display range: 0-24V

Wiring Installation Instructions:

Red: connect to positive of
Black: Ground wire, connect to the switch key of motorbike
Green: connect to the RPM signal

Function Switch Instruction:

The meter will turn on when you connect the red and black cable.
The meter will turn off if you turn off your bike key which connect to switch.

.Record Screen Set:

Press the button one time to the .Record screen.
In .Record screen, press the button one time to turn to the main screen.
Press the button for 3 seconds to reset the .Record.

The Button Function Instruction:

Press the button one time to the .RPM record.
Press the button one time to change from the .RPM record to the total engine hour meter.
Press down the button for 3 seconds to reset the .RPM record.
Press the button one time to change from the total engine hour meter to the hour meter A.
(Note: When the hour meter will start to count time, the RPM symbol will flash every 0.5 second.）
Press the button one time to change from the hour meter A to the hour meter B.
(Note: When the hour meter will start to count the time, the RPM symbol will flash every 0.5 second.）
Press down the button for 3 seconds to reset the hour meter A.
Press the button one time to change from the hour meter B to the main screen.
Press down the button for 3 seconds to reset the hour meter B.

RPM Pulse Setting:

- In main screen, press down the button for 3 seconds to enter the RPM pulse setting.
EX. You want to change the current setting pulse from 1 to 2. In main screen, press the button one time to enter the RPM pulse setting.
EX. The setting is 0.5(4C-1P).
(Note: The type can be set is: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6
EX. The ignition angle setting is changed from 1 to 2
- Press down the button for 3 seconds to back the main screen.

Attention:

Most of the 4-stroke bikes with one single are igniting every 360 degree once, so the setting should be the same as the bikes with 2-stroke and one engine.

Note:
1. (IMPORTANT) No Instructions Included.Professional Installation Is Highly Recommended！
2. Please check the size measurement chart carefully before making payment.
3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
4. The of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.


















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a