27w remote control RGB led Boat Drain Plug Underwater Light for Diving/fish lamp

27W Remote Control RGB LED Drain Plug Light Boat Underwater Diving Light

Specification:
Model:430379
: 27W
LED quantity: 9pcs
Materail of lamp: Titantic Aluminum Alloy
Lumen: 1800LM
option: RGB changable
: RGB 16 Colors
Working Voltage: 12/24V
Beam Angle: 180°
Size: Like the picture show
Cable Length: approx. 189cm

Feature:
- Single LED 3W with 9pcs LED insides ,total 27W super brightness.
- Make of Titanic Aluminum Alloy housing materials, anti-corrosion.
- easy installation, no drilling hole are needed, just screw it into the holes on your boat.
- Install for both small or large boat with DC8-28V built-in driver.
- Low consumption, energy saving, environmental protection.

Warning:
Light are for underwater use !
Professional installation is recommended.
1.5A (For 27W model) fuse must be used on all positive connections.
changing function works with controller.
Do not operate the light above water for more than 5 minutes.

Installation Instruction:
1. Loosen the drain plug.
2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting. The garboard fitting is 1/2″ NPT . (Or your special customized thread).
3. Connect to a 12V or 24V on/off switch after wiring the driver box and remote control. Please see wiring instruction.
4. Switch on the and press the "on/off" button on remote controller, then change to different modes th check if it works well.

Wiring Installation:
1. Connect the male and female plugs on light's side and driver box's side.
2. Connect the red, black cables th 12V or 24V or switch. RED to "+", BLACK to "-".
3. Switch on the and press the "on/off" button on remote controller, then change to different modes to check if it works well.

NOTES:
- There is a corrosin resistant coating on surface, to avoid the damage of surface and corrosion performmance, do not use wrench for installation and do not scratch the surface with hard stuffs.
- The light must be on 12-24V.
- If text in air, the light will turn off automatically after several minutes. This is because the Overheat Protection Circuit work. It will recover to work after the inside temperature is lower than 60 degree.
- Do not rotate the wire outlet joint or shake the wire strongly at installation. This may damage to the inside circuit and cause the light doesn't work well.

Note:
1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
3. The of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
4. No Instructions Included.Professional Installation Is Highly Recommended!

Package included:
1 x LED light
1 x fuse
1 x IR controller
1 x remote
1 x Adapter
2 x cables
1 x User manual







a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a