3 express adapter -e 4 port 3 3.0 Expansion Card express 3 converter e controller for desktop

Item Descrtion Specification: Meets Serial ATA 3.0 specification, backward compatible with 2.0 1.0 Compliant with -Expre v2.0 specification, backward compatible with -Expre v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports Four Support AHCI1.0 mode and IDE mode Support native command queue (NCQ) Supports FIS based on port multlier switches or command switches. Hot-swappable and hot-swappable. Compatible with 6G, 3G and 1.5G Hard Drives Bus interface: -Expre x1 slot(Compatible -E X2 X4 X8 X16 ) Extension ports: 4 3.0 interfaces Feature: with two heat sinks for long time safe working. System Requirements: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux The method of using E to 3.0 adapter card is as follows: 1. Connection conditions and solutions of system disk and E to 3.0 adapter card: a. The interface mode of E to 3.0 is AHCI mode. If you want to insert the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the . Otherwise, you can't start the system through our card transfer card. b. If we confirm that the interface installation system is AHCI mode, we can insert the hard disk directly into our card, and then enter the main board BIOS to set the system disk as the first boot. c. Both of the above conditions are available. If the hard disk interface of the can not be started or restarted repeatedly, it may be due to the conflict between the 's hard disk interface and our adapter card. The solution is to enter the BIOS, set the 's hard disk interface option as Disabled, and save the restart to start the system. 2. Connection conditions and solutions of common disk and E to 3.0: a. When the system disk is plugged into the and the ordinary disk is plugged into the E to 3.0 card, then only the information of the adapter card and the model of the ordinary disk need to be detected when starting. b. If 1 condition holds, or can not start the system, then to enter the BIOS, the system can be set as the first boot. 3. Connecting system disk with common disk and E to 3.0 and soing methods: a. The premise is that if the system with the installed is an AHCI model test, the following method can be used to achieve. If the system is installed in IDE mode, then only through E to 3.0 can the system be reinstalled. bAfter the conditions of 2 and 1 are established, the system can't start and need to enter the BIOS. Set the first boot as the system disk. c, 1.2 conditions are satisfied, or can not start, then it may be the integration of interface total sudden, please enter the BLOS to set as Disabled. Warm hint: -E slot must support -E 2.0 or more. If it is -E 1.0, the speed will be slow. Only (more than 100 M) speed is related to many factors: computer configuration, slot bandwidth, hard disk itself, platform environment, speed measurement will have an impact on speed. Please know and understand. What's Include 1 x -E TO 4 Expansion Card 1 x Driver CD Product tures

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.