30A 12V/24V Solar Charge Controller PWM Charge Regulator

Solar Battery Charge Controller manages the power going into the battery bank from the solar array to ensure that the deep cyclebatteries are not overcharged, and that the power doesn't run backwards to the solar panels overnight and drain the batteries.Solar panel suitable for solar system, solar street lamp, smart home, solar light box, intelligent irrigation,camping lantern etc.The solar regulator is only suitable for lead acid batteries:OPEN, not for nickel hydride, lithium, Liions, or other batteries.
Features
1.Discharge Current: 30A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging.
2.Multiple Protection Functions: This controller has short-circuit protection, open-circuit protection,reverse protection,over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
3.Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GE*L, it is not suited for nickel hydride,lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
4.LCD Display: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
5.Easy to Install and Operate: The charge controller should connect the battery first, then the solar panel, and finally the load!
6.The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production.
7.Note: Thecharge controller will heat up when it is running. Please be careful to install the charger controller on a flat,well-ventilated place)