35K Arrival 210 MARATHON N3 H37L1 Handpiece 65W 35000rpm Nail Drills Manicure Machine Pedicure Electric File Bits Kit

Package Included: 1 x Marathon-3 Champion control box1 x H37L1 Handpiece 1 x Silicon Stand 1x Foot Controller2x Spare carbon brush1x Wrench1x user's manualPrecautions when using the HandpieceInstall the Control Unit in the room of suitable temperature(0-40C). Using it in an exceively dusty, warm or humid location damages to the Control Unit.2. The Control Unit should rest on a flat steady place which is not disturbed by other things.3. Never plug or unplug the Power Cord with wet hands to avoid electric shock.4. Never use bent, asymmetrical or damaged burs. Always use standard burs.5. Do not operate exceeding the maximum rotation speed specified by the manufacturer or distributor for the bur being used6. Set the rotation speed of bur ar refer to the allowable rotion speed chart in the User’s Manual.7. Always thoroughly clean the Collet Chuck and a bur before reaembled.8. Make sure to insert the bur shank all the way, until it touches the back of the Collet Chuck. Then tighten the Collet Chuck. If the bur is used while not inserted completely, it is very dangerous because it may come out by the vibration of itself.9. Ar replace a bur, it is neceary to make sure that the Collet Chuck is securely held before running the Handpiece.? 10. While the Handpiece is running, DO NOT try to adjust the Set Ring to prevent the Control Unit from being damaged.a11. Before operating the Forward/Reverse Selector Switch to turn a rotating direction, it is surely required to make sure that the Micromotor has been stopped.And12. Take every poible care not to drop the Handpiece. It may be damaged a Ball Bearing or weaken durability of the Handpiece.And13. When work cutting or drilling, wear always goles and mask14. Always put the Handpiece of its stand while in use.15. Only the skilled engineer is authorized to disaemble the ndle Set and the Micromotor in order to avoid any damage to them16. When the Handpiece is not in use, it is recommended for a test bur or a polishing point to be kept inserted into the Collet Chuck of the Handpiece.MICROMOTOR HANDPIECERead this User's Manual thoroughly for safety before preparing the Control Unit for use.Wear the safety glaes for protecting eyes.How to operate1. Connect the Motor Cord and Foot Pedal Cord to the Control Unit(refer to seperated sheet of Control Units).2. Ar confirm the permiion power of the Control Unit, plug the Power Cord into an electric outlet3. Set the Speed Control Knob to the slowest position4. Turn on the power of the Control Unit5. If operate the Speed Control Knob clockwise, the rotation speed of the Micromotor increases6. When wish to turn a rotating direction, ar halt the Micromotor, operate the Forward/Reverse Selector Swilch7. When wish to regulate a rotating speed using the Foot Pedal, ar operate the Hand/Foot Selector Switch as "FOOT", use

1.Pckages in 24 hours, but if the it are not in stock we have the ability to prepare the making in 2 days, and ship it within .2.Once you reiceive your products, remember to give a 5-star Feedback , you will be highly appreciated and you wilet god's bleing.3.If you couldn't receive your products or you don't like our it or our services, you don't need to open the dispute, just one meage, we will Solve any problem for you.Surely you will be happy to deal with us, don't you think so? ok, let's work togetherAgain and again.....

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.