3D Printed Camera Lens Hoods Anti Glare Sun Shade Cover Light Protection Shield Cap For 9/7/6/5 for Osmo Action

MORE THAN 10 PIECES CUSTOMIZABLE LOGO (MOQ>10)

WE ARE DIRECT FACTORY ( BEST PRICE, HIGH QUALITY, GREAT SERVICE)

*IF NO CLIENT'S MESSAGE AFTER PLACING ORDER WITHIN 24 HOURS FOR THE LOGO FILE ( FORMAT .PDF / .AI / .CDR) ， WE WILL SH OUT "NO LOGO" PRODUCTS.

*CLIENT NEEDS TO PROVIDE TRADEMARK CERTIFICATE / BRAND AUTHORIZATION OR NOTE IN THE ORDER: "CUSTOM LOGO PRODUCTS I REQUESTED ARE FOR PERSONAL USE ONLY, I PROMISE NOT TO MAKE ANY PROFITABLE SALES." IN CASE OF VIOLATION OF RELEVANT PROVISIONS, THE BUYER SHALL BEAR RELEVANT RESPONSIBILITY, WHICH HAS NOTHING TO DO WITH THE SELLER!

Feichao 3D Printed Camera Lens Hoods Anti Glare Sun Shade Cover Light Protection Shield Cap for 9/7/6/5 for Osmo Action Acceories

Note, there are 5 kinds of different products optional, please choose the item you request.

The role of the hood:

When shooting outdoors, you should use a hood as much as poible, which is very beneficial for improving the quality of shooting. A set of experiments was done under the same test conditions (side backlight, distant view). Shoot the two groups with and without hood. Among them, the picture quality of a group of pictures using a hood is much higher than that of a group of pictures not using a hood! The performance is: the halo of the sky in the upper right corner of a group of pictures using the hood disappears, and the color saturation and clarity of the picture are obviously improved.

The function of the hood is to inhibit the stray light from entering the lens to eliminate the haze, and to improve the clarity and color reproduction of the image. The main purposes are as follows:

1. It can prevent the entry of non-im light and avoid fog when shooting in backlight, side light, or flash photography;

2. It can prevent the scattered light from entering the lens when taking photos with forwarding light and side light;

3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens;

4. The hood can also prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens, and to some extent shield the lens from wind, sand, rain, and snow.

Lens hoods are widely used for backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side of the light source. Whether the glare is eliminated, you can directly observe the effect in the viewfinder. In addition to the optical quality of the lens itself, the role of the hood is very obvious. The color, sharpne, and contrast of the pictures without the hood are not ideal, and the pictures with the hood have good performance in these aspects. With a small hood, the effect is quite different. Using a hood is not only a means to improve the quality of the picture, but also a good profeional habit, but also an expreion of the profeionalism of a rigorous photographer!

Note: This product only includes hoods, not sports cameras.

for Osmo Action:

for Hero 5 6 7 Black:

for Hero 9 Black (Small and Large 2 versions optional):

1x Portable Lens Protective Cover Case with Lanyard for Hero 9 Camera Lens Protector 3D Printing PLA Acceories

Brand: Feichao

Colour: Black

Material: 3D printing

Feature:

Lens capfor 9 camera, not suit for any other model cameras.

Made of 3D printing material, environmentally friendly plastic material, the exterior is made of hard plastic shell, which can withstand collisions and provide better protection;

Anti-loose sponge is attached around the inside of the product, which is safer and more aured to use;

Equped with a lanyard, it is more convenient to carry.

Quantity: 3D Printed Lens cap x1

Please check the below ant information for customize:

Warm T:

1, Logo customization must be established without involving infringement. If there are any operational difficulties during the period, we hope buyers can understand and aist in canceling the order.

2, If you request the Customizable Logo Service, Please make an order for more than 10 pieces, and Please provide the Logo Pattern and your idea on the meage board.

3, The MOQ of the custom logo is 10pcs, we will just sh itwith no logo if the quantity is below 10pcs.

4, We hope to be satisfied with the buyer, we may contact the customer several times, resulting in an extended order proceing time. If this happens, we hope that customers can help us extend the order time.

Logo Position: Effective picture as reference (if you need another place, please feel free to meage us)

Printing Method: Laser Marking (if you need another method, please feel free to meage us)

File for Printing request: Please kindly send the artwork to us ( format .pdf, .ai, .cdr)

MOQ: Over 10 Pieces (If large quantity, we will give you a more satisfactory quotation)

If you have any requirements or ideas, please feel free to contact us.

1. All price does not include any taxes or extra fees. We are not responsible for the problcaused by customs clearance.

2. Orders proceed timely after the payment verification.

3. We only sh to confirmed order addrees. Your order addre MUST MATCH your Shping addre.

4. The images shown are not the actual item and are for your reference only.

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.

6. If you have not received your order after the Estimated Delivery ofShping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions of choosing shping methods, which means you need to check carefully with the estimated delivery time and promise delivery time) Your satisfaction is our top priority!

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your poeion for more than 7 days, it will be considered used and WE WILL NOT ISSUEA OR REPLACEMENT to you. There are NO EXCEPTIONS! Shping cost is bear by both seller and buyer in half.

2. All returned itMUST BE in the pack and you MUST PROVIDE us with the shping tracking number, specific reason for the return, and your order ID.

3. We will YOUR FULL WINNING BID AMOUNT, upon recet of the item in its condition and pack with all components and acceories included, AFTER BOTH Buyer and Seller cancel the transaction from Aliexpre. OR, you may choose to have a replacement.

4. We will bear all the shping cost if the product(s) is (are) not as advertised.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very ant. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform to your satisfaction.

It is impoible to addre iues if we do not know about them!

About shping
Shping and Pack All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.