6 Gears Spot Welding 0.12mm for Spot Welder Machine Kit

Mini spot welder with output power is suitable for welding 0.1-0.15mm nickel plated steel sheet and 0.1mm pure nickel sheet quickly. Portable and , space-saving , easy to carry outside.
Easy to operate, one key turn on or off. 6 gears of output power adjustable, freely switching according to practical needs. Applicable to home use, DIY, maintenance, etc.
2 mobile welding are made of 10AWG silicone wire and copper rod, and it comes with 2 protective sleeves. The welding allow long welding range and can meet welding needs.
5300mAh -capacity lithium , low power consumption, long usage time when full . And it can also be used as power bank to charge your phone conveniently.
Made of high quality ABS and , features great durability and stable performance, has long service life. Advanced power management and design, non-reset and non-zero during welding.

Note
After arrival can not be used, may be the power is too low, resulting in the spot welder does not work, the charging light does not , and does not turn on, (at this time charging 1-2 hours, the voltage rises can be restored) after a full charge, only then will show Oh, use 5v 1A charger.
If it is fully , it will
1. If you have a multimeter, you can measure the voltage at the OUT+ OUT- port Here is the remaining battery power
2. Full charge is about 4.15V 3.3V is low voltage
The main :
Battery:3.7V/5300mAh
:6 gears adjustable
Trigger delay time:0.6 seconds
Charger:5V1A,the current should not be less than 1A
Material: abs
colour: black

Package Contents:
1 x Spot welder with 2 welding
2 x Welding pen sleeve
1 x Nickel strip
1 x USB data cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.