600mL 75W 220V/110V Electrical Paint Sprayer 200mL/min Room US

Specifications:
: 75W
Voltage: 220V / 110V
Frequency: 50Hz
Working : ≥0.8Mpa
Working current: 0.4~0.6A
Jet flow: 200mL/min
Capacity: 600mL
Dimension: 9x21x21cm / 3.5x8.3x8.3"

Feature
- High Production Efficiency: Greatly improve efficiency and save paint. Make quick and easy work of all jobs, such as houses, garages decks, furniture, fences.
- Easy to Operate: Used special plastic composite material, the body is ultra-light, and it does not cause fatigue during long-term operation.
- Easy to Maintain: Easy to disassemble and simplify ordinary cleaning and maintenance.
- Sturdy and Durable: special plastic composite material and special leak-proof material, long service life.
- Wide Applicability: Suitable for most , including latex paint, oil-based enamels, water-based , house .
- High Safety Performance: The high voltage has an automatic protection function, which can cut off high voltage at high speed under overcurrent conditions, thereby effectively protecting the and safe operation.

Use Operation:
1. Fill the bottle with spray . Connect the supply, press the switch, the will start, there will be a strong vibration impact sound, the spray will start after a few seconds, and it will turn into a low normal working sound.
2. If it doesn't work normally after starting, then try adjusting the knob on the back: first turn the knob in and then slowly retreat to the by hand at a distance of 50cm from the nozzle, which has a strong tremor. (Note: after adjustment, do not adjust it casually)
3. The effective distance for decontamination is 10-15cm between the nozzle and the object. Operate at a 45-degree inclination angle and spray repeatedly until the stain is removed.

Maintenance:
1. The spray can be operated continuously, but it should also pay attention to moderation to avoid overheating damage.
2. The sound is normal but there is no spray, or the spray is weak or loose, it is because the nozzle is blocked. Unscrew the nozzle to clean up debris, or use a fine to twist it gently from the inside to the outside.
3. The spray is normal, but the appears to be insufficient or unstable. Open the handle cover and check if the pump's screw is loose.
4. After the operation is completed, it is necessary to spray for a few seconds to spray the in the pump, and then inject a few drops of from the oil hole and spray for a few seconds.

Package included:
1 x Paint Sprayer
1 x Viscosity Cup
1 x Spare Nozzle

Notice:
1. Please allow 1-5mm error due to manual measurement. Please make sure you do not mind before you bid.
2. The colors may have different as the difference display, please understand.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a