60W Digital Display Electric Iron Adjustable Temperature Welder Portable Mini Ceramic Heater Welding Electric Tools

60W Digital Display Electric Iron Adjustable Temperature Welder Portable Mini Ceramic Heater Welding Tools Specification: Material: ABS Shell Size: 220x25x25mm Line Length: 1100mm Working voltage: AC200-240V 50HZ EU plug/AC110V 60HZ US plug Temperature range: 180-520℃, the error after calibration is le than +/-5℃ Use 900 series iron tip, plug-in heating core Tin time: 18~20s Alarm: EAO heating element is open C/F conversion: Pre the + and-keys at the same time when the power is not turned on. Do not release them at the same time. When the power is turned on, release the two keys when you see the LCD display. Then you will enter the setting menu. Pre the + key to select C/F, and pre the two keys at the same time to exit the setting. In the setting state, stop heating, and start heating after exiting. Set temperature operation: (1) Pre the + on once to increase the temperature, and long pre the + on to increase the temperature continuously. (2) Pre the - on to decrease the temperature, long pre the - on to decrease the temperature continuously. (3) When there is no on for 3 seconds, the newly set temperature will be memorized, and the temperature will be kept at the next startup. (4) When the heating core reaches the set temperature, the temperature of the iron tcan reach the set value after about 30~50s. Calibration operation: (Generally choose 320 degree calibration.) (1) Put the iron ton the after powering on for 90s, and add solder to the iron tto make the iron tand the thermocouple fully contact. (2) Wait 2-4s after the shows that the temperature stabilizes, and record the temperature of the . (3) Remove the iron from the and pre + and -at the same time to enter the temperature calibration interface. (4) Input adjustment amount: e.g: Set the temperature to 290°C, and the actual measured temperature is 282°C, then pre to display 08°C on the LCD, Set the temperature to 290°C, and the measured temperature is 300°C, then pre to display -10°C on the LCD. (5) Pre the + and - on  at the same time to exit the temperature calibration interface. Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-2cm measuring deviation due to manual measurement. 1 X Iron

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.