8W USB Iron Set Adjustable Temperature Ceramic Core Heating Portable Home Welding Solder Repair Tools With 1 PCS Tip

Handskit USB Charging 5V 8W Adjustable Temperature Electric Kit with stand solderng wire

The operation is simple:

1. Install the , do not fully tighten the tip.

2. Plug in the cable.

3. For the first time, you need to pre the switch 6 times to turn it on.

4. Pre the on to switch the temperature mode. They are green (low temperature around 100-180°C), blue (200-300°C), and red (300°C+). The red gear is easy to burn out the tif it is used for a long time, so it is generally used for preheating. Please use the blue gear for maintenance and welding.

Precautions:

1. The power supply current should be greater than 1.7A. If the power supply current is insufficient, it will enter the protection and cause the light on the switch to flicker uncontrollably. 2. If the tis too tight, a short circuit will occur, and the light on the switch will flicker uncontrollably.

Product instruction use:

1: pre and hold the switch key for 2 seconds to starts, the green index lamp temperature is330-350 °C

2:switch by single pre, blue index lamp temperature is 370-400 °C.

4:switch by single pre, red index lamp temperature is: 430°C-450°C.

Quienergized:

It can be used by plugging in the power supply, which is simple and convenient.

Note: plug in the power to use a no battery.

Multiple power supply methods:

1:plug in the power can be used.

USB with the charger:

it can be used after plugging in the power supply, and the can be used for 8 hours.

ible tensile and high temperature resistance

Internal heating thermostat:

Aluminum-free tin, anti-ox-idation, fast heating on tin, easy installation.

Technical s:

model : 5v 8w

power:8-10w

adjust temperature range:330-450℃

Tin melting time: