Addressable Tape Light 5m 30leds IP30 12V WS2811 White PCB

product

12V WS2811 LED Strip: Note: The price is only Led Strip, Not Included Power Supply or Led Controller! WS2811 Must Use DC12V Power Supply AND Led Controller to Control! Every 0.5meter with solder joints, please note! PCB color: /Black PCB Protection grade: (1) IP30 --- No waterproof, for indoor use (2) IP65 --- Silicone coating, easy cut, outdoor use (3) IP67 --- Silicone tube, need reseal after cut, outdoor use Product parameter: (1) Working Voltage: DC 12V (2) LED Source: SMD 5050 RGB (3) LED : Epistar (4) LED QTY: 30/60/144 LED/M (5) IC QTY: 10/20/48 Pcs/M (6) Power: 9/18/43.2 W/M (7) Grey Scale: 256 / Color (8) Cutability: 3 led / cutting ( External 2811 ic, 1 ic control 3 LED ) (9) Beam Angle: 120 ° (10) Color Mode: 133Pattern & 100 Speeds (11) Dimension: 5000mm x 10mm x 2.4mm (12) Packaging: 5m / roll 12v ws2811 rgb strip + 3 pin connector (13) Warranty: 2 years Features: (1) Flexible PCB ( IP30,IP65) With 3M adhesive tape on the back for easy installation. (2) Energy saving and envment protection. (3) High brightne 5050 SMD LED light strip. (4) Solid-state, high shock or vibration resistance. (5) Low power consumption, high intensity. (6) Match the RGB controller and power supplier system. (7) Wide viewing angle. (8) Available in various single and RGB colors. Easy installation, Every one LED lamp can be arbitrary cut off, good flexibility, easy installation, can be arbitrary bendin Dream color lighting, Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software. the city lighting project, entertainment and leisure places lighting.

product

5V WS2812B LED Strip: Note: The price is only Led Strip, Not Included Power Supply or Led Controller! WS2812B Must Use DC5V Power Supply AND Led Controller to Control! Every 0.5meter with solder joints, please note! Pay attention: PCB / Black PCB 30leds/m, 60leds/m, 144leds/m IP30: Non- waterproof IP65: Waterproof in Silicon Coating IP67: Waterproof in SiliconTube the length as you choose Features: Input voltage:DC5v; Power: 30leds/m----9watt/meter 60leds/m----18watt/meter 144leds/m----43.2watt/meter LED resource: WS2812B led (5050 SMD RGB LED with built-in improved version of ws2811 ic) LED:each LED is separately controlled IC Type: improved version ws2812 IC(built inside the 5050 smd rgb led) Of IC: (1 IC drives 1 led ); Pixels: 30/60/144/meter; Grey scale: 256; Bits/color:8-bits/color; FPCB Width: 30leds/m----10mm 60leds/m----10mm 144leds/m----12mm FPC color: BLACK/ Protection rate: IP30 Non-Waterproof IP65 Waterproof in Silicon Coating IP67 Waterproof in Silicone Tube Colors:Full color RGB, dream color changing; Cuttable:every LED is cuttable; Package:in anti-static bag,IP30 IP65 with 3M adhensive tape on the back (IP67 without 3M adhensive) each strip with one free male connector for connector

product

5V WS2813 LED Strip: Note: The price is only Led Strip, Not Included Power Supply or Led Controller! WS2813 Must Use DC5V Power Supply AND Led Controller to Control! Every 0.5meter with solder joints, please note! Pay Attention: 1, 30,60,144 means: 30 Leds/m, 60 Leds/m, 144 Leds/m 2, IP30 Non-Waterproof / IP65 Waterproof in Silicon Coating / IP67 Waterproof in Silicon Tube 3, IP30 IP65 with 3M adhensive tape on the back (IP67 without 3M adhensive) 4, Each strip with one free male connector for, The length of the strip as you choose Main feature: One pixel damaged will not affect the other LEDs'working, Dual signal wires version, Signal can jump to transfer FEATURES: LED Light Source: WS2813 LEDs ( Same Protocol as WS2811S But With Dual-Signal Wires,So Can Be Controlled by the Same WS2811/ws2812 Controllers) Input Voltage: DC 5V Power: 30 Leds/M --- 9 Watt/Meter / 60 Leds/M --- 18 Watt/Meter / 144 Leds/M --- 43.2 Watt/Meter LED Resource: WS2813 led (5050 SMD RGB LED with built-in improved version of ws2811 ic) LED: Each LED is separately controlled IC Type: Improved version ws2813 IC(built inside the 5050 smd rgb led) Of IC: (1 IC drives 1 led ) Pixels: 30Leds/60Leds/144Leds/meter Pitch: 16.6mm(1000/64) Grey Scale: 256 Colors: Full color RGB, dream color changing Bits/Color: 8-Bits/Color FPC Color: BLACK / FPC Width: 30 Leds/M --- 10 MM / 60 Leds/M --- 10 MM / 144 Leds/M --- 12 MM Protection Rate: IP30 Non-Waterproof / IP65 Waterproof in Silicon Coating / IP67 Waterproof in Silicon Tube Cuttable: Every LED is cuttable Package: In anti-static bag, IP30 IP65 with 3M adhensive tape on the back (IP67 without 3M adhensive), each strip with one free male connector for connector Working Temperature: -40 - 70 °C Storage Temperature: -50 - 80 °C Source Life: 50,000 hours Connector: 4PIN connector terminal pair (Red: 5V power, Green: Date line, Blue: standby date line, Black: GND) Recommand controllers: T-1000s,T-8000A;T-100K;T-200K;T-300K MORE FEATURES: (1)One pixel damaged will not affect the other LEDs working. (2)The power protection,if +5V and GND reverse polarity,the LED will not be burned. (3) Dual signal wires version, signal can jump to transfer. (4)The electronic devices integrated,it does not cause virtual welding in the installation proce. 1, all the electronic components are integrated in a 5050 lamp beads, it does not require any other peripheral auxiliary electronic components to form a complete external control pixels. While reducing the product at the time of installation inverted Weld, caused by poor. 2, serial cascade interface, dual-line signal transmiion, to achieve the functions of HTTP, which under a single pixel without causing damage to its lower pixel normal lighting, silk ho does not affect the overall results. 3, intelligent reverse polarity protection, product installation acce 5V power supply in case of reverse, will not cause damage to the lamp beads. 4, built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. 5, the transmiion distance between any two points in le than 5 meters without any additional signal amplification circuit. 6, when a refresh rate of 30 frames / sec, the number of cascades of not le than 1024 points. 7, the data transmiion speed of up to 800Kbps. Light color consistency, cost-effective. LED WS2813 Symphony light strip Function Description: Happy control a single lamp, water, windows, rear meteor, chasing, pattern change animation, video, text, and so on. Use of the lamp, in which a pixel bad, does not affect the normal operation of other lights so as not to affect the overall results. can show, random combinations into any pattern, in particular made light of the screen to use. No separate addre to write to the lamp can be achieved HTTP, installation easier. Meanwhile lamp beads which also integrates a capacitive resistance, so that electronic components do not need to be on board the auxiliary light bar, thus increasing the stability of the product. LED WS2813 strip use for: The product rich colors and bright light, high visibility, more visually appealing. Is widely used in the corridor wall, indoor decoration, product model decorative lighting, decorative lighting consoles, speakers decorative lighting, entertainment, wine cooler bar backlight, smallpox backlight, LED light boxes, LED luminous signs, aquarium supplies, car decoration etc., it is to replace the traditional neon signs, fluorescent lamps and a new generation of lighting.

product

12V WS2815 LED Strip: WS2815 or F2815 LED strip is upgraded version of 5V WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full , 12V version has no voltage drop. You don't need to inject power as frequently as 5V version. Individually addreable: Each pixel can have its own color and brightne. You can control it individually and set them to or animation you want. 256 brightne display and 24-bit color display. Dual-signal wires: WS2815 or F2815 LED strip is Similar like the version of 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmiion. If one LED is damaged, the following LEDs can still work. Specifications: IC type :WS2815 IC Gray level: 256. View angle: 120°. Input voltage: DC12V. Color: full color 24-bit. FPCB board color: /Black. Power: 0.3W/LED 30/60/144 LEDs/m. Model: WS2815 strip 5050rgb s. Storage Temperature:-30-+95 °C. Operating Temperature:-20 ~ +85°C. Led Qty: 30/60/144pcs RGB SMD 5050 per meter. The distance between two LEDs:30Leds/m -- 28mm, 60Leds/m -- 12mm, 144Leds/m -- 1.92mm. Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm. Waterproof level: IP30: Non- waterproof, IP65: Waterproof in Silicon Coating, IP67: Waterproof in SiliconTube. Package includes: 1 x RGB 30/60/144leds/m led strip. 1 x 4pin connector. Note: Power adapter and controller are not included! It is forbidden to light up for a long time when the strip is in the spool. 1, LED type: WS2815 IC (WS2815). 2, Capacitance in the SMD LED: There are capacitance in the SMD LED (WS2815). 3, Signal transmiion distance between two Leds: 3 Meters (WS2815). 4, High voltage resistance: Maximum input voltage is DC12V (WS2815). 5, Operating temperature: Normal combustion temperature (WS2815).

product

5V SK6812 LED Strip: Note: The price is only Led Strip, Not Included Power Supply or Led Controller! SK6812 Must Use DC5V Power Supply AND Led Controller to Control! every 0.5meter with solder joints, please note! 30, 60, 144: 30leds/m,60leds/m,144leds/m IP30: Non- waterproof IP65: Waterproof in Silicon Coating IP67: Waterproof in SiliconTube (RGBCW 6000-6500K ;RGBWW 2700-3000K ; RGBNW 4000-4500K) the length as you choose LED source :5050SMD RGBW built-in SK6812 set Voltage(DC):5V Power: 30LEDs/meter ---------9W / Meter 60LEDs/meter ---------18W / Meter 144LEDs/meter -------43.2W / Meter LED type :SMD5050 IC type : SK6812 LED/per meter:30, 60,144leds/Meter (each LED is separately controlled) IC/per meter: 30, 60,144IC/Meter (1 IC drives 1 led ) Pixel /per meter :30, 60,144Pixels/Meter Grey Grade: 256 Color: RGBW (WW 2700-3000K ; CW 6000-6500K;NW 4000-4500K) PCB color: / Black available Waterproof Grade: IP30-----NON-Waterproof IP65-----Epoxy IP67-----silicone tube IP30,IP65 ,There is a 3 M self-adhesive tape at the back side. You can install easily Application: Applicable for automobile and bicycle decoration, border or lighting Widely used for home decoration use, hotels, s, shopping malls Architectural decorative lighting, boutique atmosphere lighting Extensively applied in Backlighting, concealed lighting, channel letter lighting Emergency & security lighting, advertisement sign lighting Decorative lights for holiday, event, show exhibition

About shipping
Shipping and Packaging All items will be double checked and well packed before sending.Items will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.