Adjustable Temperature Electric Iron Welding Heater Ceramic Internal Heating Element For Solder Iron A1321

80W/60W Adjustable Temperature Electric Welding Heater Ceramic Internal Heating Element For Solder

Manual Preparation ◆ Always keep the tof the bit clean, ensure to coat the bit liberally with solder the first time the is switched on. Note: Initial tinning is done in order to extend the life of the bit. ◆ Wet the provided sponge prior to using. ◆ Chethat the solder wire is ready for use and adequately extended from the case as shown in step 1 in the above illustration below. ◆ Ensure that the bit fits snugly and has adequate contact with the internal element. How to solder: How to change/replace bits: Using the ◆ After turning the on, the bit will commence heating and will be ready for use when the solder wire begins to melt at contact. ◆ Initiate by ensuring the melted solder makes a clean connection between the contacts that you attempting to solder. ◆ Move the solder wire and away once enough solder is placed and wipe any residual solder using the wet sponge. ◆ Always remember to switch the off at the mains and place it in the provided holder while it cools enough to be stored safely. Notes: ◆ Use safety and take neceary precautions to avoid injury or fire. ◆ The heats up quickly. Select a suitable temperature to operate at. Using the for long hours and at high temp may shorten the life of the product. ◆ Make sure to only switch the on when required and switch it off when not, in order to reduce the risk of injury and fire. ◆ Clean the tever so often to extend its life. Avoid using s and surfaces as this could damage the metallic surface. ◆ The provided bits are 900M series and spares are available from where you purchased this product

60W Heater

Specification Model: 60W Heater Two-core wire Type: Ceramic heater Material: Ceramics Power: 60W (Please make sure your is like follow or compare with 60W Heating Element) Applies to: 908 and the same type of Adjustable Temperature or station

80W Heater

Specification Model: 80W Heater Two-core wire Type: Ceramic heater Material: Ceramics Power: 80W (Please make sure your is like follow or compare with 80W Heating Element) Applies to: 908s and the same type of Adjustable Temperature or station

A1321 Heater

Specification Model: A1321 Four-core wire Type: Ceramic heater Material: Ceramics Power: 24V 50W (Please make sure your is like follow or compare with A1321 Heating Element) Applies to: 900M, 900L, 907, 908, 913, 914 and the same type of or station

A1322 Heater

Specification Model: A1322 Four-core wire Type: Ceramic heater Material: Ceramics Power: 24V 50W (Please make sure your is like follow or compare with A1322 Heating Element) Applies to: 900M, 900L, 907, 908, 913, 914 and the same type of or station

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.