ANLEON S2 UHF Stereo Wireless Monitor System 4 Frequencies 100-240V

ANLEON S2 UHF Stereo Wirele Monitor System 4 Frequencies 100-240V Profeional Digital Stage In-Ear Monitor System

• 6 selectable channels• Powered by 2pcs AA batteries, low power consumption design for long playtime up to 12 hours• Multle sets of receivers can be operated with a single within theoperating range• Dynamic expansion circuitry for high S/N ratio• Complex anti-interference circuit for using 6 sets at the same time without mutualinterference• Receiver LCD displays frequency, channel and battery levelLong operating range up to 100mCurrier frequencies

US version526-535MHz (526.3/527.6/529.2/531.1/533.3/534.2 MHz)clickhereto place order561-568Mhz (561.5/562.7/563.9/565.1/566.7/567.5 MHz)clickhereto place order670-680MHz (670.3/671.6/673.2/675.1/677.3/679.3 MHz)clickhereto place order913-917MHz (913.3/913.9/914.6/915.4/916.2/917.0 MHz)EU version

863-865MHz (863.1MHZ/863.4/863.9/864.2/864.6/864.9 MHz) clickhereto place order

FCC ID: 2AGRX-S2System:ANLEON S2 is an IEM system designed for stage performance and broadcasting. High S/N ratio and dynamic range ensures optimal audio quality. The dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the S2.Intended for drummers/keyboardist/guitar player/vocalist and other performers, the unit features a high-power headphone output that helps to ensure that as the band gets louder, you'll still be able to hear your performance.S2T UHF Stereo:Volume Control: Adjustment of the volume for both output channels.Stereo/Mono switch: Stereo mode (the device outputs the signal fed into the left input to the left headphone and the right signal to the right headphone). Mono mode (Channel L and channel R are mixed and output to both headphones.)Power Switch: Switches the unit on and off.XLR INPUTS (L) and (R): Dual XLR balanced jacks connect to the input signal source.9V DC socket:  Please use the included 9V 300mA adapterS2R UHF StereoReceiver:1, LCD screen: Displays frequency, channel and battery level.2, Antenna: Receives RF signal from the .3, Power indicator: Green indicates functioning battery.4, Earphone socket5, Power and volume knob6, Frequency adjustment on7, Battery compartment

Channel:6Headphone output: 3.5mm jack socket Power Supply: DC9V/300mAReceiver Operating Time: up to 12 hours, 2x 1.5V AA (Not Included)Operating Range: 80m(environment dependent)RF Output Power: