Arrival 2 IN 1 Electronic Dog Fence System and Dog ining Collar Beep Shock ion ining and Fence Function 27nf

New Arrival 2 IN 1 Electronic Dog Fence System and Dog ining Collar Beep Shock ion ining and Fence Function 27nf

Product description:

The intelligent 2-in-l electronic wirele fence ining dog is a new product in the pet electronic product market. It has a novel appearance and comfortable hand feeling. It is worth mentioning that it integrates the dog device and the wirele electronic fence in one operation, and the operation is simple. Convenient, not only can better protect your pet's safety, but also allow pets to get better ining within a limited range.

Main Features:

1.2 in 1 function; LED display, pet wirele fence and remote control sound ion shock iner.

2. The LED displays5 different control radius distances; 30 files = 30 meters, 60 files = 60 meters, 90 files - 90 meters, 150 files =150 meters, 300 files = 300 meters

3.In wirele fence mode:

a. The nsmitter and receiver do not need to use the code, and the signal can be normally operated after g turned on;

b. One nsmitter supports multi-collar receiver

4.Remote dog ining mode:

a. For code usage, you can control three dogs at the same time, 001 for the first dog, 002 for the second dog, and 003 for the third dog.

b. Three functions: sound warning, ion warning, static warning;

c- Each function can be adjusted from 1-6 files

5-Reflective with fluorescent TPUto improve night safety;

6. The nsmitter and receiver arerechargeable, and thereceiver is waterproof;

outdoor electronic wirele fence and dog ining function mode conversion operation

Power on the default fence mode LED display 30, pre the MODE on to switch back and forth

1. When the LED dial display is "30", it is the outdoor electronic wirele fence mode. Pre the MODEQ function on on the right to switch to the dog ining mode. In the dog ining mode, the LED dial display "O0111 0r " 002" can also be "003".

2. In the outdoor electronic wirele fence mode, "30" means radius "30" meters, "60" means radius 60 meters, 5 different distances can be adjusted, 30 meters, 60 meters, 90 meters, 150 meters and 300 meters.

3. In the dog ining mode, three dogs can be controlled at the same time. The LED dial display "001" indicates that the first dog is corresponding, "002" indicates the second dog, "003" indicates the third dog, and the display screen There are three functions on the right side, namely sound function, ion energy function and electric shock function. Each function has l-6 intensity adjustable. The low number indicates weak, the higher the number, the stronger the intensity, and the modes are adjusted with "+" and "-“

How to use the outdoor electronic wirele fence function:

Pre the power on to turn it on, and the default fence mode LED will display 30.

1. The outdoor electronic wirele fence is centered on the nsmitter with a maximum remote radius of 300 meters

2. Adjust the distance by "+" and "-", display "30" for the radius "30" meters, display "60'1 for the radius of 60 meters, 5 different distances can be adjusted, 30 meters, 60 meters, 90 meters, 150 meters and 300 meters

3. When the dog exceeds the set range of motion, the receiver that is worn will automatically start the ining function, and the voice prompts for about 5 seconds, then there is a static reminder to remind the dog to return to the safe area. lf the dog continues to move forward, The sound and the electric shock work at the same time, the frequency is gradually strengthened (adding a time), and after the dog feels the warning of the sound, it will not continue to move forward.

Tip: If the dog does not listen to the ion warning or the speed of running is too fast beyond the wirele fence range, you can switch the dog's dog ining mode to in the dog, and the dog returns to the wirele fence range to switch to the electronic wirele fence mode.

4. A single nsmitter can support multe receivers working simultaneously.

5. The nsmitter is fully charged and can work continuously for about 20 hours.

6. nsmitter charging: DC 5V power supply, lithium battery 2500 mAh, it is recommended to use the charger.

How to use the dog ining function:

1. The remote control distance of the dog iner can be up t0 250 meters.

2- Three dogs can be controlled at the same time. The LED dial display "001" indicates the first dog, "002" indicates the second dog, and "003" indicates the third dog.

3. Independent "sound", "ion", and "electrostatic reminder" three function on selection. Each function has l-6 levels of intensity adjustable. The low number indicates weak, the higher the number, the stronger the intensity, and the modes are adjusted with "+" and "-"

4. when the "Sound" function is selected, pre the corresponding function on, and the size of 1-6 files can be adjusted. If you need continuous voice prompt ining function, pre and hold the on until you don't need ining.

5. When the “ion" function is selected, the corresponding function on can be preed, and the size of 1-6 files can be adjusted. If the alarm ining function is required, pre and hold the on until you don't need ining.

6. When the "Static" function is selected, pre the corresponding function on, and the size of 1-6 files can be adjusted. If you need continuous alarm ining function, pre and hold the on until you don't need ining to release the hand, and pre for 10 seconds. The electric shock will be stopped afterwards to prevent injury to the pet.

7. The strength of each function will retain the last operation. For example, when you set the 6-speed size under the selected sound function, after restarting the product, the sound function still maintains 6 files. If you need to change the size, directly Pre the "+" or "-" on.

8. When using the dog ining function, if you only in one dog, you can directly operate the dog ining device. If you in three dogs at the same time, when operating the dog ining device, pre the MODE on to enter the dog ining mode, long preure MODE pair code:

The number fes, and the code is long after the code is succeful. 001 corresponds to the first dog, 002 corresponds to the second dog, and 003 corresponds to the third dog, so that the same function signal will not be received at the same time, and the dog that does not need to be ined will not be prompted by the warning.

note:

1. A weak battery at 3 volts: The LED shows 000 fes and sounds: drops. . . . drop. . . . The beep sounds, the red light fes when charging, and the red light is long after g fully charged.

2. Long pre key 3 seconds code mode

How to use the receiver:

1. Pre the power on to turn it on. After the power is turned on, the power light will be on. Then change the power to shut down.

2. The receiver adopts the recyclable charging mode, the 3.7 volt lithium battery 400 mAh lithium battery, after the charging line is inserted, the red light fes, and the green light is long when the battery is fully charged.

3. If the receiver is still at 5 minutes, it will enter the sleep state, and the receiver can be awakened by the receiver, which can save more power.

4. The LED test light is used to test the electrostatic intensity. The brighter the test light, the stronger the electric shock intensity.

5. The receiver is waterproof, rechargeable and practical.

6. The conductive column can be repd, and a longer or shorter electric column can be selected according to the dog's hair.

note:

When the receiver is low, the power signal light fes. It indicates that the battery is

insufficient to complete the charging as soon as poible.

nsmitter:3.7V 2500mAh LiP

Receiver:3.7V 400 mAh LiP