AS30 LED Music Audio Spectrum indicator Amplifier Board SCM Stereo Level indicator VU Meter Speed Adjustable With Case-Diy kit

Operation video:http://v.youku.com/v_show/id_XMTU5NDM2MzY1Ng==.html Product Size: With case( length * width * thi ):126 mm * 31mm * 19.5mm LED display part size( length * width * thine):76mm *20mm * 8mm Input voltage: DC 5V audio two-channel input AS30 has 5 kinds of claic display mode. Through the on settings, set with memory function. Cli: mode adjustment Mode 1: Columnar mode Mode 2: Peak mode Mode 3: Peak up Mode 4: Mirror mode Mode 5: Point pattern

Long pre 1 second:

10 speed adjustment, the top left of the red LED will show the corresponding, 1-10 light the more the slower the speed (default 4) Long pre 3 seconds: 7 level gain adjustment, the top right of the corresponding LED will show the default value of 4,5 \ 6 \ 7 for the gain magnification 1/2 times, 1/2/3 for the gain reduction 3/2 times) Long pre 6 seconds: 1, the left side of the middle of 10 green LED light --- L left channel; 2, the right side of the middle of 10 green LED light --- R right channel, 3, about 10 middle green LED light --- stereo; Channel Descrtion: Stereo mode, because the left and right channel signal is inconsistent, left and right light bar height will be inconsistent, when set to monaural, left and right light bar shows the height will be consistent, rhythm will be stronger. (Default stereo) Speed and gain Descrtion: According to personal preferences to adjust the drop speed, the general DJ fast song with speed, slow song with slow speed; generally by adjusting the input volume size to control the display amplitude, gain adjustment in the case of inconvenient adjustment of the volume. Operation Instructions: 1, please connect the cable USB into the computer USB interface, 3.5mm headphone head through the audio one Split the two branches into the computer or other equment headphone output port, another branch connected to the audio equment; 2, by adjusting the input volume with the gain adjustment will display the amplitude control to the appropriate range, the gain of the special, In the case of small volume, set it to level 4; 3, the product must use the front signal, the signal amplitude can not exceed 5V, can not directly connected to the amplifier output and the speaker (to be connected with the potentiometer must be attenuated), this will cause damage to the product. 4, please do not use the cottage phone charger or other rple is too large, unstable voltage power supply, will cause the end of noise or cause damage to the product. Note: 1, ch direction, the ch "STC" consistent with the following figure; 2, pay attention to the USB interface, welding direction, do not welding anti, look carefully below. 3, tantalum C1 brown horizontal + level, corresponding to +. 4.LED has a word for the positive side of the corresponding "+"

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.