Audio T3 Phono for Turntable Phonograph Preamp Vinyl Record Player Mini Stereo HiFi Vacuum Amplifier DIY-with EU adapter

Specifications:

Output level: 600mV @3mV 1KHz

Signal to noise ratio: ≥98dB

Working voltage: DC12V 1.5~2A

Dimensions: 118.5*98*33MM (without protruding knobs and terminals)

Frequency response: RIAA compliant

Distortion: 0.1%

Operation Steps:

1. The gear switch is in the OFF state.

2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, che whether the lower pin is deformed before installing the tube, and the deformation can be red by hand).

3. Connect the sing-out output cable to the audio input connector.

4. Connect the rear-end device that needs an external connection to the audio output connector.

5. Connect the DC12V power supply.

6. Rotate the gear switch to select the desired gain gear.

7. When the preamp input is input, the phono input will automatically switch to the preamp input.

8. Input interface: (can be connected to CD, DAC decoder, mobile phone, TV, etc.)

9. Audio output interface: (such as amplifier, amp, active speaker, etc., red to the right channel, white left channel)

Parameters:

Output level: 600mV @3mV 1KHz

Signal to noise ratio: ≥98dB

Working voltage: DC12V

Dimensions: 118.5*98*33MM (without protruding knobs and terminals)

Frequency response: RIAA compliant

Distortion: 0.1%

Common problem:

Q: All my lines are connected, but there is no sound output?

Answer:

1. Che if the gear switch is in the OFF state. Che whether the tube light is on after the switch is turned on. If the fault still exists, replace the power supply with the same voltage output (must be 12V) and test again.

2. If the indicator light is on and the gear position switch is also on, unplug the power supply and re-insert the tube.

3. If both of the above are normal, che if the playba device of the input source is paused, muted, or the volume is at its minimum.

Paage included:

1*T3 Phono

2* 6A2 Tube

1*Audio Cable

1* Manual

1*Power Adapter(option)

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.