Automatic 12v and 24V battery Charger

Charger output side and input side

Microprocessor Control (CPU).

STAGE AUTOMATIC CHARGING:

This is a fully automatic battery charger with 7 charge stages.

Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

7-stage chargers are suitable for most battery types including Calcium, Gel, Lithium, LiFePo4 and AGM, Wet batteries. They may also help restore drained and sulphated batteries.

Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, Lithium, LiFePo4

Switchmode technology: Yes

Polarity protection: Yes

Output short protection: Yes

Non battery link protection: Yes

Over voltage protection: Yes

Over temperature protection: Yes

Cooling: Fan

Input voltage: 100-240V AC, 50-60Hz

Rated output: 12V 6A 24V 3A

Minimum start voltage: 7.0V

Battery range: 6Ah-120Ah

Thermal protect: 65'C+/-5'C

Efficiency: App. 85%.

Compliant standards: CB,CE, IEC60335, EN61000, EN55014

Dimension (L×W×H): 160×100×62mm

Weight: 470g

LCD Display: Charge Voltage

LCD Display: Charge Current

LCD Display: Inside Temperature (allowed tolerance)

Reverse connection protection. Display: ERO

Output short-circuit protection. Display: ERO

Charging for 12V Motorcycle battery

Charging for 24V battery

Charging for 12.6V Lithium Battery

Charging for car battery

Repair Mode (Time: 16 hours)

An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.

Desulphation stage (only for car mode), LCD display: dES

The Desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. sulphation occurs when lead-sulphate hardens and clogs up the battery cells.

AC cable length: 90cm, DC cable length: 60cm.