BT-S3 Motorcycle Helmet Headset Bluetooth-Compatible Moto Interphone 1000M 2

BT-S3 Features1. Automatic answerning function2. Enjoy the music3. Helmet Hands free4. All Weather Water Resistant

Main Features :(1) Wirele headset for Bluetooth-Compatible enable cell phone at a range of up to 10 meters.Bike-to-bike for rider & paenger or two separate bikes up to 800-1000 meters.up to 10 hours talk time when connected to cell phone.up to 8 hours talk time when using the feature.up to 300 hours standby.(2) Call out, call answer, call reject, call hang up.(3) Receive a cell phone call automatically.(4) Support audio transfer(5) Suppor the last number redialing.(6) FM Radio function(7) Enjoy the cell phone music through A2DP or connect GPS(8) Control cell phone music through AVRCP : forward, backward, play, pause.(9) Automatic switching among Bluetooth-Compatible cell phone, , stereo music.(10) with DSP echo cencellation and noise suppreion technology, crystal clear voice quality is guaranteed in a high speed.(11) on panel is water-proof and sun-proof , while the design is druable.(12) Audio cable to connect MP3 , GPS , - and so on.

if you want to with one more rider , please buy one more piece by clickinghere(It can support Max 3 units.)

Technical Specifications:Version: 3.0+EDRFrequency: 2.4GHzSupports: A2DP and AVRCPSupported Bluetooth-Compatible Profiles: Bluetooth-Compatible Headset and Hands free Profiles with Automatic DetectionOperating Range: Up to 10m for cellphonesBattery Type: Rechargeable Lithium Polymer 450mAhStand by: Up to 300hrsTalk time: Phone up to 10hours up to 8 hoursCharging Time: 3hoursFeatures descritpion:can be realized Bluetooth-Compatible helmet headset with helmet headset 800 meters (Or 800-1000 meters) meters of direct full-duplex ;can be achieved Bluetooth-Compatible and cellular phones, calls, stereo music and automatic switching between them;mobile phone first, calls automatically switch to the mobile phone to answer calls, hang up automatically after recovery ;FM Radio functioncan be acceed by telephone, refused to telephone and hang up;support for voice switching;through the transmiion over A2DP to enjoy the music through mobile phones or connected GPS;can be controlled via mobile phone music AVRCP play, pause, previous song, next song played;there are rumors DSP noise reduction and proceing, high-speed exercise to ensure a clear call quality;

To Pair 2 devices in mode

When both devices are turned off, pre and hold the power / on on both devices until both units f red/blue repeatedly. You need to hold the on for more than 6 seconds and dont let go when you see the blue light.Short pre the power / on on ONE of the two devices and this device will search and auto-pair to the other in mode. A live call will be initiated.( will start)If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth-Compatible devices are turned off.When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light fing) on both units and pre the on on one of the devices.

To Pair 3 devices in mode

Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).Ensure the third unit is switched off when pairing the other two devices.Only 1 connection can be live at a time. When succefully paired the connections can be switched by ending any live call and returning to standby.From Standby pre the power/ on 1 time for one of the pairings to be called, or long pre(about 2 seconds) for the other pairing to be called.The pairing for 1 or 2 prees will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.i.e. A will pre the power/ on 1 time to call B and long pre(about 2seconds)to call C. B will pre the on 1 time to call C and long pre(about 2seconds) to call A. C will pre the on 1 time to call A and long pesee(about 2seconds) call C.

To Reset the pairing memory

If you have probl pairing, then it is best to reset the pairing memoryTurn on the relevant unit into standby mode. Pre the power/ on for 3-5 seconds till a dudurdquo can be heard.Let go of the on when the tone is heard.(The unit will turn off)Restart, the memory will be erased. (Repair again)

To Start FM radion

After turn the unit on, Pre Phone on for 2 times (till hear durdquo tone), let go of the on, FM radion will start.Short pre:rdquo+rdquo or - on you can adjust the channel.

When FM radio start,Pre Phonge on for 2Times,FM will end up(stop).

Package include:1 x BT-S3 1 x Earphone with microphone(for full helmet or open helmet)1 x Cls2 x Velcro1 x Charging usb cable1 x Screw driver1 x Audio cable1 x User Manual (English, Italian, Spanish, German, French)Charger not included, but you can use any other current lower than 1A charger.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.