Car FM01FM02 Receiver Bluetooth 5.15.3 Handsfree Call Mini USB Power Car Kit Auto Wireless Audio For Car Fm Radio

Feature:This product is mainly used in car scenes. It adopts the latest Bluetooth-compatible 5.1 technology and mature FM technology to make car fans easily enjoy car wirele music.No audio cable is required (traditional Bluetooth-compatible receivers basically need audio cable, resulting in a lot of clutter in the car).No delay.No slow run.Good compatibility, basically all cars and mobile phones can be used.Through the improvement of appearance and structure, the product size is compreed to be small and mini.Specification:Product model: FM01Bluetooth-compatible version: V5.1Working voltage: 5VEffective probability: within 10mAudio output: FM Default frequency: 95.0mhzSNR: ≥ 95dBAnswer the phone: supportAutomatic return: supportedPower supply mode: USB power supply (5V)Product size: 32.2 * 17.3 * 12mmInstruction:USB interface: USB interface is used for power supply. When in use, the product can be inserted into a USB interface with an output voltage of 5V, such as the car's own USB interface (5V) and car charging interface (5V).Multifunction keys:1. Adjust FM frequency. After the product is powered on and before Bluetooth-compatible pairing, clithe on to change the FM frequency (a total of 87.5mhz, 95.0mhz and 103mhz are optional).2. When playing a song, clithe on to pause playing.3. Answer the phone: when someone else calls, you can clithe on to answer the phone.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Specification:Product model: SFD-FM02Bluetooth-Compatible version: V5.3Working voltage: 5VEffective distance: within 10 metersAudio output: FM FM frequency range: 87.5MHZ-108MHZDefault frequency: 95.0MHzSignal to noise ratio: ≥ 95dbAnswer phone calls: SupportedAutomatic backflow connection: supportedPower mode: USB power supply (5V)Product size: about 32 * 17 * 10mm/1.25 * 0.66 * 0.39inchGro weight: 9gon Description:Multi function M on:1. To adjust the FM frequency, pre and hold the M on, and the screen will start fing to enter FM adjustment mode. Long pre or short pre the "+" and "-" ons to quickly and slowly adjust. After the adjustment is completed, clithe M on to confirm, and the screen will stop fing.2. When playing a song, clithe M on to pause playback.3. Answer the call: When someone calls, you can clithe M on to answer the call.Multifunctional "+" and "-" ons1. "+" on: Clion theNEXTsong, long pre to increase the volume, and in FM adjustment mode, cliand long pre to adjust the FM .2. "-" on: Clion the previous song, long pre to lower the volume, and in FM adjustment mode, cliand long pre to adjust the FM .Instructions:1. Insert FM02 into the USB interface in the car, with an output voltage of 5V.2. Use the multi-functional M on to set the FM frequency band, then turn on the car radio and adjust the FM frequency band of the radio to match the FM frequency band of FM02.3. FM02 has an automatic memory function for FM frequency, which defaults to the last used FM frequency every time it is turned on.After setting the FM frequency band, find the Bluetooth-Compatible pairing name FM02 in the Bluetooth-Compatible settings of your phone and clito pair. Then the music played by the phone will be played on the car's speakers.5. Adjusting the volume: When playing music, the phone's music volume can be adjusted to its maximumAdjust the car volume to a moderate level. It is not recommended to turn up the car volume too much, as the higher the car volume, the more severe the noise and distortion.Attention:1. The default frequency band of FM02 is 95.0MHz, which can be used directly. If there is a lot of playbanoise, it can be adjusted to other frequency bands.2. When the radio of certain car models is turned on, the built-in USB interface in the car will be turned off. At this point, if FM02 is inserted into the built-in USB port, it cannot be used. In this case, you can plug FM02 into the USB of the and car charger. Use a power supply on the interface (the output voltage of the USB must be 5V).3. FM02 may be too noisy or unusable in some cars with USB interfaces. It is recommended to insert FM02 into the car charger for use.4. FM02 does not have an automatic shutdown function. It is recommended to unplug it from the USB interface when not in use.5. When FM02 cannot be searched in the Bluetooth-Compatible settings of your phone, or cannot be paired after searching and clicking, it is recommended to clear the previously connected Bluetooth-Compatible devices in your phone, then restart your phone and try again.

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Bluetooth-Compatible Receiver1 x Manual