Core 2 Mobile InteI P8700 SLGFE Dual Core 2.53GHz 3M 1066MHz Socket 478 CPU Processor

Core 2 Mobile InteI P8700 for SLGFE Dual Core
2.53GHz 1066MHz Socket 478 CPU Processor

Before installing the CPU must see:
1, remove the first CPU, clean up the dust on the fan and heat sink,
clean up the remnants on the , the grease,
especially hard the greasemust be thoroughly cleaned,
and this is very important!

2, in the correct direction to insert new CPU,
and at the top of the CPU coated with a thin layer of silicone grease.
Don't use too much, just to fill the between the top of the CPU and the heat sink is the most ideal.
(small branchgrease to arranged for example, squeezing 2-3 small lattice grease asappropriate)

3, heat sink, first with the finger fins up and down and move around a few,
letinside the grease evenly spread and discharge the air,
and then in accordance with the digital sequence annotation fixing screw fins on (or diagonal)
successivetightened, each rotation laps and then unscrew a screw, don't time to put ascrew in the end,
the successive rotation until the stationary equilibrium.

Note:
for CPU, such as the discovery of the CPU temperature is too high,
or lowtemperature high and unstable,
please carefully control the above 3 items to check, and check whether the quality is too poor to grease.
Most of theproblems can be solved this way.

Package include
1 pcs







a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a