DC 0-100V LED Digital Voltmeter Buzzer Battery Indicator 5V

Detailed Information About The Product:

Wiring instructions:
As a two-wire meter application, send a short circuit board R1, connected to the inputs of the input voltage can be displayed. When using two-wire measuring range do not 30V)
As a three-line header using the R1 plate off the table, the ground and power supply voltage connection 4-30V power supply for the header. Indirect ground voltage to be measured and the test voltage input. Two to the board pads is the same, can according to the actual wiring by one or two will do) Adjust panel potentiometer can display the value of prospective effect.
5PIN pin for the expansion of output, K1, K2 for the onboard external key switch lead, as do key-board, the two PIN via an external button, the button functions with the same function button panel. as the lower limit alarm output, output low when the set value. upper limit alarm output, the output is higher than the upper limit set at the low value. , outputs a control signal for driving the driver circuit, lights, or relay other loads.
Upper and lower limit setting : two are pressed, the red light ) is lit, press the or - key to set the alarm limit voltage value. And then pressing both buttons simultaneously, yellow ) is lit, press the or - key to set the lower limit alarm voltage required. And then pressing both buttons simultaneously to exit the setting. Supply voltage: 4-30V
Measuring range: 0-100V
Upper/Lower limit setting range: 0.1-99.9V
Upper/Lower limit output mode: on set range will output high level,otherwise output low level.
Minimum resolution: 0.1V
Refresh rate: 300mS/
Operating temperature: -40 to 85°
Input reverse polarity protection: YES
Installation: 2pcs 2mm screws
Size: 29x23x10mmLxWxH)
Applications:
DIY power supply, as the voltage display.
Voltage monitoring.
The device overvoltage or undervoltage alarm, or overvoltage or undervoltage protection.
Battery over-discharge protection.
To be more application you develop.
Kindly Note:
When applying two-wire, the measurement range and of supply is the same, so do not 30V measurements. When measuring voltage exceeds 30V, with a three-wire!
Colour: multicolor
Material: plasticmetal Package Contents:
1 * LED Digital Voltmeter Buzzer Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is /- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please dont be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !