DC 100V 1A 10A 50A 100A Mini 0.28inch LED DC Digital Volt-Red-Blue

( Shunt not include ) I am really wonder , I have note that the 50A and 100A must connect a shunt, but some friends do not read my descrtion and open dispute and give bad feedback . I hope you can read clearly. if no shunt the measured current flows through the and the watch will burn out. and even you olny measure voltage , even you measure the current below 50A , The meter with a range of 50A or 100A must be connected to the External shunt (Shunt need to buy alone) 50A 100A Shunt Link as below: http://www.aliexpre.com/store/product/External-Shunt-FL-2-100A-75mV-50A-75mV-Current-Meter-Shunt/4253020_32879352313.html?spm=2114.12010608.0.0.4f322a52damhjn

Voltage measurement range: 0.0V-100V

Current test range: 0-999mA, 0-10A, 0-50A, 0-100A (4 ranges available)

Power supply range: DC4-30.0V

Voltage error: plusmn0.1%

Current error: plusmn1%

External shunt specifications: 75 milliohms

Working current < 20mA

Refresh rate: About 300mS once

Display method: Double three 0.28" LED digital tube

Display color: Red + Red, Red + Blue,Red+Green,Green+Green,Green+Blue

Lead length: 15cm

Dimensions: 48 x 29 x 22 mm, length X width X thickne;

Mounting holes: 46 x 27 mm

Operating temperature: -10degC~65degC

According to the customer's frequent questions, make the following summary reference: Note: The meter with a range of 50A or 100A must be connected to the shunt to measure the current no matter whether the measured current is le than 10A! Otherwise it will burn the header. Voltage display normal, current display 0.00 or 0.0 Make sure that the thick black wire is connected to the negative pole of the battery, and the thick red wire is connected to the negative pole of the load. (Note that the discharge is not the same as the charging connection, see the concept of load and power supply.) (The header uses the ed ch, after the factory paed very strict testing and calibration, to ensure that no quality probl before leaving the factory. The current display shows 0 99.99% is the wiring is not right, please be patient and carefully check the wiring) Current display is not accurate: If it is a direct power supply or an independent power supply and device power supply are common ground, as long as the fine black line can be disconnected accurately. Connecting to power does not appear: All AC power rectified power must be filtered by an electrolytic above 1000uF to supply power to the meter. Judging the quality of the header (the following are two cases of normal headers) Without shunt, connect the thin red line and the thin black line to the power supply. The meter current of 50A shows 50.0~59.9, and the meter of 100A shows 100~109. Connect the shunt, connect the thin red line and the fine black line to the power supply. The meter current with a range of 50A shows 0.00, and the meter with a range of 100A shows 0.0; Other considerations: The current can only be measured on the negative side of the power supply and on the negative side of the load. Voltage range: The power supply voltage range of the 5 line header is 4~28V, that is, the voltage of the thin red line cannot exceed 28V. About the concept of load and power During discharge: The battery, switching power supply, and transformer are power supplies, and the s, lamps, motors, and power devices are the loads. When charging: The charger, , and solar energy are power supplies. The and the battery are the loads.

Package Include:

1 *Digital ( Shunt not include )

and the shunt link is:

https://www.aliexpre.com/store/product/External-Shunt-FL-2-100A-75mV-50A-75mV-Current-Meter-Shunt/4253020_32879352313.html?spm=2114.12010608.0.0.14582a52YofZSW

pls notice that each different indicatorneed to connect the corresponding shunt.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.