DC 3V-6V to 400KV Boost Step-up Module High Power High Voltage Transformer High Temperature Arc High Frequency

Parameter: Input: 3.7-6V 4A Input line length: about 10 cm Output: 400KV 0.5A Line length: about 8 cm High-voltage two-pole discharge distance: 1 cm - 2 cm Lenth:56mm About input power: single 3.7V lithium battery or two series, such as 18650 battery, or nickel cadmium/nickel hydrogen battery, 4V or 6V lead battery, etc. (6V battery can achieve the best results) Product instructions: The module is divided into input and output. The red and green (white) line is the input end. The red and green (white) are negative. The two high-voltage lines with the same color are the input end. The appropriate arc distance is fixed at the output end. The input terminal is connected. The battery can generate high voltage or high temperature arcs. Precautions: 1. The high-voltage module should be protected from high-voltage and no-load power. Before power-on, the high-voltage line end must be adjusted. The high-voltage line arcing distance is proportional to the battery voltage and capacity used. 2. When testing the arc distance, it should be tested from short to long. When the power is on, it is forbidden to exceed the longest arcing distance. Because the high voltage energy cannot be released, the module is easily damaged. 3. The power of the module is large, and the internal heat is not suitable, so it is not allowed to work for a long time. 4. The method to determine whether the battery capacity can drive the maximum output power is to measure the battery voltage during arcing. If you are around 6V, you can output the maximum power. 5. The small-capacity lithium battery is connected in series at 7.2V. The voltage measured in the arc-sampling state has dropped to about 4V. The smaller the capacity, the lower the voltage pull. Therefore, it is recommended to use more than 2000MA lithium battery, and it is better to have a battery of 4000MA or more.

You can choose:

1* 400KV 56mm

1* 400KV 65mm

1* 1000KV

1* 50KV

50KV square:

Product selling point:

1: Wide range of applications

2: Small size

3: Simple to use

4: cost-effective

5: Used for high-voltage testing, teaching, product development, etc.

The input of the module is red, positive, green, and negative, and the color of the two output lines is the same.

Physical volume: length 40mmX width 40mmX height 18mm

Input voltage: DC3.6-4.8

Output voltage: DC50KV (arc within 2CM)

Arc distance: 5-15MM

Features: small size, no residual power

This baby is suitable for high-voltage testing, teaching, product development, etc.

Precautions for use:

The input of the module is red, positive, green, and negative, and the color of the two output lines is the same.

The high-voltage module should be avoided when it is powered on at high voltage and no load. Before power-on, the appropriate distance from the high-voltage wire end must be adjusted. The arcing distance of the high-voltage wire is proportional to the voltage and capacity of the battery used. The arc is drawn from short to long. It is strictly forbidden to exceed the longest arc. distance.

Package Included:

1* High Voltage

20000V square:

Specifications:

Input voltage: DC3.7-7V

Output voltage: 20000V

Working current: 10ma

Discharge distance: within 14mm

Module input: red positive white negative,

When using, adjust the output spacing first and then turn on the power.

Intermittent work is recommended for short periods of time.

Dimensions: 79.5mmx22mmx20mm

Package Included:

1* High Voltage

40-50KV:

Product selling point:

1: Wide range of applications

2: Small size

3: Simple to use

4: Working current: 1800mA

5: Ignition distance: 2-10mm

Parameter:

Product name: DC pulse high voltage package

Product size: length 50mm width 20mm thickne 18mm

Input voltage: DC 3.6V, 4.8V

Output voltage: 40-50KV

Working current: 1800mA

Ignition distance: 2-10mm

Inlet Diameter & Length 1.2±0.03 & 130mm

Output live wire diameter & wire length 2.2±0.03 & 280mm

Output ground wire diameter & wire length 2.2±0.03 & 280mm

Weight 35g

Product use: security equment acceories, kitchen stove ignition, electrostatic adsorption experiments

Package Included:

1* High Voltage

800KV:

Product selling point:

1: Wide range of applications

2: Small size

3: High efficiency

4: Output high voltage pulse

5: cost-effective

This module is a high-voltage module/high-voltage made by a high-voltage package/transformer through a circuit composed of components. It can be used as a high-voltage source for students' popular science experiments/electronic instruments/negative ion /science mini-production. The module is made using the princle of Tesla coil. It can output high voltage pulse, small size, high efficiency and violent discharge intensity.

Product Name: High Voltage

Volume: length 88mm diameter 26mm cut surface diameter 24mm

Voltage: Input DC6-12V,

Output DC800KV

Current: input 4A, output 0.5A

Line length: input about 10 cm,

output about 10 cm

Structure: shell integrated

Two-pole discharge distance: about 0.5-1.5 cm (more easily damaged)

Uses: commonly used in high-voltage production, electronic DIY, product development, high-voltage electronic anti-theft, etc.

How to use: The two poles of the high-voltage output end (single-color thick line) are fixed within the specified discharge distance, and the red line of the low-voltage input end (two-color thin line) is connected to the battery.

Input requirements: This product does not need auxiliary circuits, and can be used directly when connected to a battery. The input terminal is connected to a single 3.7V lithium battery (such as 18650 battery) or a nickel-cadmium/nickel-metal hydride battery pack, 4V or 6V battery, etc. (6V battery can reach the maximum best effect)

Notes on using the module:

1. The high-voltage module should be avoided to be powered on when the high-voltage is no-load. Before power-on, the appropriate distance from the high-voltage line must be adjusted. The arcing distance of the high-voltage line is proportional to the voltage and capacity of the battery used.

2. When testing the arc distance, the experiment should be from short to long. It is strictly forbidden to exceed the longest arcing distance when power is on. Because the high-voltage energy cannot be released, it is very easy to damage the module.

3. The power of the module is large, and it is not suitable for heat diation inside, so it cannot work for a long time.

4. The way to judge whether the battery capacity can drive the maximum output power is to measure the battery voltage when the arc is drawn. If it is around 6V, it can output the maximum power.

5. Two small-capacity lithium batteries are connected in series to 7.2V, and the measured voltage has dropped to about 4V in the arcing state. The smaller the capacity, the lower the voltage. Therefore, it is recommended to use a lithium battery above 2000MA, and it is best to use a battery above 4000MA if poible.

Package Included:

1* High voltage high voltage module

20KV square:

Features:

Dual high-voltage cables can be lit by ette paper, and one high-voltage cable can be supported in Metallkoerper current and without sound.

This module can be used as high school science experiment equment, electronic equment, negative ion , and high voltage source for doing science hours.

About performance:

Single 18650 or idle mobile phone battery (remove the protective plate, the position is more than 2000mAh, and the capacity is planned).

Notice:

1. The high-voltage module should avoid using no-load high-voltage current. The power must be set at the appropriate distance from the high voltage output line to the Batteriekapazitaet proportional to the distance and to utilize the high voltage arc (the voltage is not supplied as high as poible to have power).

2. Experimental test from short to long arc distance. Without the maximum arc distance used by the stride power, the energy cannot be released and the module can be easily damaged due to the high voltage.

3. Due to the power, the internal heat is not easy, each working time should be set within 5 seconds.

Specification:

Material: Metal, Plastic

Color: black

Dimensions: 19×20×18mm (LxWxH)

Weight: 19 grams

Input voltage: DC3.6V-6V

Input current: 1.5A

Output voltage: (please pay attention to safety when using) DC20KV

Output current: 0.05A

Input line length: about 1.1mm (red is positive)

Ausgangsleitungslaenge: about 110 mm

High voltage bolar discharge distance: 5mm

High Art: Impulse Current

Structure: high integration, low voltage

Package Included:

1* 20kV Boost Boost Power Module

60KV:

Product selling point:

1: Small volume high preure package

2: Small size, big power

3: Suitable for high preure small production

4: Product development and maintenance

5: Output voltage: 60KV

Product name: Small volume high preure bag

Product size: 40*35*20MM (manual measurement)

Weight: 46.6G

Shell structure: square one-piece

Working voltage: 3.7-6V

Output current: 5MA

Working current: 2A

Power: 20W

Output voltage: 60KV

red positive green negative

Arc length: 0.5-1CM

Continuous working time: ≤10S

Product features: Small size, high power, suitable for high-preure small production, product development and maintenance

Package Included:

1* 60kV high voltage package module strong arc booster high voltage

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.