DC12V 30A High-Power Brushless Motor Speed Controller DC 3-phase Regulator PWM

DC12V 30A High-Power Brushle Motor Speed Controller DC 3-phase Regulator PWM Feature: With micro single-ch system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushle motors. It has several functions: 1.Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is neceary for high-speed high-power motor to protect user's safety. 2. Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will ba to normal power after temperature is decreased. To protect the actuator module, please diate heat during long-time using. 3. The signal lo prevention: Auto shut down when there is no signal detected from PWM signal (potentiometer ). 4. Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushle motors. 5, Programming Functions: With single-ch control system, some functions could be altered: a, Startup: ible slow startup/direct startup b, Braking: Re load qui braking/free braking c, Adjustable Timing: Small/medium/large d, Low Voltage Protection: Low/medium/high e, Battery Types: Lithium /niel chrome/NIMH/plumbic 6. Ba to Factory Settings: Wrong operation can be cleared 7. Other Function(please ignore if only used for motor drive ) : The external PWM signal can send signal to control speed or to turn steering gear, therefore it can test steering gears le than 55 g. Specification: Rated voltage: DC 6-12.8V Current rating: 32A (within 5s, max current can not exceed 40A) Nominal power: 360W Rated Power: 5V 0.5A Temperature protection: 110°C Speed range: 8%~98% For motor poles: 2-18 pole Start: ible start/immediate start Brake: re load /no brake Speed signal: 8KHz/16KHz fixed frequency PWM Paage included: 1set x Brushle Motor Speed Controller Drive(No retail paage)

About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.